761549
84
Zoom out
Zoom in
Previous page
1/117
Next page
Operation
You will find how to switch from automatic to
manual mode, depending on the shifter used,
described in your operating instructions for your
gear shift.
If you use the shifter when in automatic mode, the
gear system will change to the next gear, but it will
remain in automatic mode.
Manual gear changes in automatic mode
influence shift behaviour in your gear system and
adjust gear changes to your riding performance
since it is a self-learning system.
If the system is switched on for the first time when
a new, unused wheel is used, the system will learn
the gears first. To do so, the automatic system
changes to the highest/most difficult gear and
then switches through all gears during the first
ride. The new gear is shown briefly on the screen
each time it is changed.
Since the drive unit detects the gear shift and
consequently reduces motor assistance briefly, it
is also possible to switch gears under load or on
hills.
If the pedelec is brought to a halt from a speed
greater than 10 km, the system can automatically
switch back to a pre-set START GEAR.
You can set the START GEAR in the system
settings.
6.15.3.2 eShift with manual Shimano DI2
hub gears
Only applies to pedelecs with this equipment
The new gear is shown briefly on the screen each
time it is changed.
Since the drive unit detects the gear shift and
consequently reduces motor assistance briefly, it
is also possible to switch gears under load or on
hills.
If the pedelec is brought to a halt from a speed
greater than 10 km, the system can automatically
switch back to a pre-set START GEAR.
You can set the START GEAR in the system
settings.
6.15.3.3 eShift with Shimano DI2 automatic
hub gears
Only applies to pedelecs with this equipment
The new gear is shown briefly on the screen each
time it is changed. Since the drive unit detects the
gear shift and consequently reduces motor
assistance briefly, it is also possible to switch
gears under load or on hills.
6.15.3.4 eShift with NuVinci H|Sync/enviolo
with Optimized H|Sync
Only applies to pedelecs with this equipment
NUVINCI CADENCE mode allows you to
reduce or increase the desired pedalling
frequency using the plus button or minus button
on the control panel.
If you hold the plus button or minus button down,
you can increase or reduce the pedalling
frequency in increments of five. The desired
pedalling frequency is displayed on the screen.
NUVINCI GEAR mode allows you to switch
between several specified transmissions using
the plus button or minus button on the control
panel. The selected transmission (gear) is
displayed on the screen.
6.15.3.5 eShift with Rohloff E-14 Speedhub
500/14
Only applies to pedelecs with this equipment
The new gear is shown briefly on the screen each
time it is changed.
Since the drive unit detects the gear shift and
consequently reduces motor assistance briefly, it
is also possible to switch gears under load or on
hills.
If the pedelec is brought to a halt from a speed
greater than 10 km/h, the system can
automatically switch back to a pre-set START
GEAR.
You can set the START GEAR in the system
settings.
MY20H01-42_1.0_21.06.2019 83
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules BOSCH Purion Pedelec Display 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules BOSCH Purion Pedelec Display 2020 in the language / languages: English as an attachment in your email.

The manual is 13,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules BOSCH Purion Pedelec Display 2020

Hercules BOSCH Purion Pedelec Display 2020 User Manual - German - 123 pages

Hercules BOSCH Purion Pedelec Display 2020 User Manual - Dutch - 118 pages

Hercules BOSCH Purion Pedelec Display 2020 User Manual - French - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info