761549
35
Zoom out
Zoom in
Previous page
1/117
Next page
Overview
Applies only to Pedelecs with eShift with manual Applies only to Pedelecs with eShift with NuVinci
Shimano DI2 automatic hub gears. H|Sync/ enviolo with Optimized H|Sync
Screen display Change
– Start gear + This is where you can set the start
gear. The automatic gear switch
function is switched off in Position
– –. This menu option is only
shown when the on-board
computer is positioned in its
mount.
Gear adjustment You can use this menu option to
make a fine adjustment to the
Shimano DI2. You'll find the
specified setting range in the gear
manufacturer’s operating
instructions. Make the fine
adjustment as soon as you hear
any unusual noises from the gear
shift. This menu option is only
shown when the on-board
computer is positioned in its
mount.
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the on-board computer is
positioned in its mount. This menu
option is only shown if you have an
electronic control gear.
Table 45: Changing the system settings
Applies only to Pedelecs with eShift with
Shimano DI2 automatic hub gears.
Screen display Change
Gear adjustment You can use this menu option to
make a fine adjustment to the
Shimano DI2. You'll find the
specified setting range in the gear
manufacturer’s operating
instructions. Make the fine
adjustment as soon as you hear
any unusual noises from the gear
shift. This menu option is only
shown when the on-board
computer is positioned in its
mount.
Gear recovery You can use this menu option to
reset the rear derailleur if it has
been detached due to a crash or
impact against the derailleur. You
will find a description of how to
reset the gear shift in the gear shift
manufacturer’s operating
instructions. This menu option is
only shown when the on-board
computer is positioned in its
mount.
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the on-board computer is
positioned in its mount. This menu
option is only shown if you have an
electronic control gear.
Table 46: Changing the system settings
Screen display Change
Gear calibration This is where you can perform a
calibration on the stepless gear.
Press on the Lighting button to
confirm calibration. Then follow the
instructions. You also might need
to perform a calibration while riding
in the event of a fault. In such
cases, you also press on the
Lighting button to confirm
calibration and then follow the
instructions on the display. This
menu option is only shown when
the on-board computer is
positioned in its mount
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the on-board computer is
positioned in its mount. This menu
option is only shown if you have an
electronic control gear.
Table 47: Changing the system settings
Applies only to Pedelecs with eShift with Rohloff
E-14 Speedhub 500/14
Screen display Change
Start gear This is where you can set the start
gear. The automatic gear switch
function is switched off in Position
– –. This menu option is only
shown when the on-board
computer is positioned in its
mount.
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the on-board computer is
positioned in its mount. This menu
option is only shown if you have an
electronic control gear.
Table 48: Changing the system settings
3.6.4 System message
The drive system monitors itself continuously and
if an error is detected, it is indicated by a system
message. The system may switch off
automatically depending on the type of error. You
will find assistance for system messages in 8.5
First aid. There is a table of system messages in
the Appendix.
MY20H01-42_1.0_21.06.2019 34
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules BOSCH Purion Pedelec Display 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules BOSCH Purion Pedelec Display 2020 in the language / languages: English as an attachment in your email.

The manual is 13,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules BOSCH Purion Pedelec Display 2020

Hercules BOSCH Purion Pedelec Display 2020 User Manual - German - 123 pages

Hercules BOSCH Purion Pedelec Display 2020 User Manual - Dutch - 118 pages

Hercules BOSCH Purion Pedelec Display 2020 User Manual - French - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info