761542
60
Zoom out
Zoom in
Previous page
1/126
Next page
MY20H02-12_1.0_12.06.2019 60
Operation
6.3.3.3 Turning the handlebars to the side
Only applies to pedelecs with this equipment
Open the clamping lever.
Pull the locking lever on the stem up, and
simultaneously pivot the handlebars into the
desired position.
You feel the locking lever click into place.
Pull out the handlebars to the required height.
Lock the quick release.
Figure 55: Pushing locking lever upwards – by.schulz
speedlifter used as an example
6.3.3.4 Checking the clamping force in quick
releases
Open and close the quick releases on the stem
or the seat post.
The clamping force is sufficient if the clamping
lever can be moved easily from the open final
position into the middle and has to be pressed
with the fingers or base of the thumb from the
middle point onwards.
6.3.3.5 Adjusting the quick release clamping
force
If the clamping lever on the handlebars cannot
be moved into its final position, screw out the
knurled nut.
Tighten the knurled nut on the seat post if the
clamping lever's clamping force is not sufficient.
If you are unable to set the clamping force, the
specialist dealer will need to check the quick
release.
6.3.4 Adjusting the brake lever
6.3.4.1 Adjusting the pressure point on a
Magura brake lever
The pressure point setting is adjusted using the
twist knob.
Turn the twist knob towards the plus (+)
symbol.
The brake lever moves closer to the handlebar
grip. Re-adjust the grip distance as necessary.
The lever pressure point activates sooner.
Crash caused by incorrectly set clamping
force
Excessively high clamping force will damage the
quick release and cause it to lose its function.
Insufficient clamping force will cause a
detrimental transmission of force. This will cause
a crash with injuries.
Never fasten a quick release using a tool (e.g.
hammer or pliers).
Only use the clamping lever with the specified
set clamping force.
CAUTION
!
Brake failure due to incorrect setting
If the pressure point is set with brakes where the
brake linings and brake disc have reached their
wear limit, the brakes may fail and cause an
accident with injury.
Before you set the pressure point, ensure that the
brake linings and brake disc have not reached
their wear limit.
WARNING
!
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules BOSCH Intuvia Pedelec Display 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules BOSCH Intuvia Pedelec Display 2021 in the language / languages: English as an attachment in your email.

The manual is 13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules BOSCH Intuvia Pedelec Display 2021

Hercules BOSCH Intuvia Pedelec Display 2021 User Manual - German - 169 pages

Hercules BOSCH Intuvia Pedelec Display 2021 User Manual - Dutch - 165 pages

Hercules BOSCH Intuvia Pedelec Display 2021 User Manual - French - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info