647375

Henkelman POLAR Manual

40
Zoom out
Zoom in
Previous page
1/43
Next page
BOXER / MARLIN / FALCON / POLAR SERIES USER MANUAL
Version 06.03 DIG.EN 40
REMARKS ON SPECIAL APPLICATIONS
MACHINE WITH GAS FLUSH SYSTEM (if applicable)
If the machine is equipped with the gassing system then the following remarks are important :
NEVER USE GAS MIXTURES WITH MORE THAN 20% OXYGEN AND OR OTHER EXPLOSIVE GASSES. THIS
COULD CAUSE FATAL EXPLOSIONS.
NEVER USE SEPARATE GAS BOTTLES WITH A MIXER WHEREBY ONE OF THE BOTTLES IS ONLY FILLED
WITH OXYGEN. MALFUNCTIONING OF THE MIXER OR IF THE OTHER BOTTLE WERE TO BE EMPTY COULD
CAUSE FATAL EXPLOSIONS.
All guarantees and/or liability expire in the case of accidents and/or damage caused by using oxygen or other explosive
gasses.
The maximum gas pressure that can be set in the packaging is 35% (-0.35 bar on the vacuum meter). This means that
there is 65% gas and 35% vacuum (under pressure) in the packaging. If a higher gas pressure results in insufficient seal
quality contact the supplier or Henkelman BV for more information about connecting external seal pressure.
Henkelman recommends checking the pressure and amount of gas in the gas bottles regularly. Ensure that the gas
bottle(s) is(are) correctly anchored. Always turn off the main cock on the gas bottle if the machine is not in operation or if
the gas flush function is not active.
PACKAGING LIQUID PRODUCTS
The machines can be also used for packaging liquid products like soups or sauces. In this process the vacuum process
must be carefully monitored (only possible with transparent lid or lid with inspection window). The [STOP VACUUM] key
must be pressed as soon as bubbles appear in the product; the saturation point (same as boiling point) has then been
reached.
Settings for programs for packaging liquid products can best be programmed using automatic programming (see page
19-20).
The saturation point of liquids is reached at a certain ratio line of low pressures and high temperatures (see the example
table for water below). The saturation point will be reached sooner in the vacuum process when packaging liquids with a
high temperature (the amount of vacuum will therefore be less).
Henkelman recommends therefore to first cool liquid products before packaging. By so doing an optimal vacuum can be
achieved for the product.
Saturation point of water – relation between the pressure and temperature of the water
Vacuum pressure
[mbar]
1000 800 600 400 200 100 50 20 10 5 2
Boiling Point
Temperature [°C]
100
94
86
76
60
45
33
18
7
-2
-13
A handy tip when packaging liquid products is to use a liquid insert plate so that the product remains at the bottom of the
packaging during the vacuuming process and there is less risk of liquid splashing out of the packaging. Contact the
supplier or Henkelman BV for more information about the liquid insert plate.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman POLAR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman POLAR in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman POLAR

Henkelman POLAR User Manual - German - 44 pages

Henkelman POLAR User Manual - Dutch - 43 pages

Henkelman POLAR User Manual - French - 46 pages

Henkelman POLAR User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info