647370
30
Zoom out
Zoom in
Previous page
1/48
Next page
30
Important before maintenance
If the machine is not functioning properly or if it produces strange noises, turn it off
immediately with the On/Off switch and contact the supplier.
If the machine is equipped with a gas flush system, always close the main valve at
the bottle during standard maintenance activities. When cleaning the transparent lid,
never use cleaning agents containing solvents. Check at least once a week if there
are cracks in the lid. In case of cracks, turn off the machine immediately and contact
the supplier.
Major services must always be carried out by an authorised supplier.
Oil maintenance
Oil Cleaning Program
Use the control panel to select the pump cleaning program (‘up’▲ or
‘down’▼). The program lasts 15 minutes and it is advisable to run it at
least once a week. The program runs automatically after closing the lid.
If necessary the program can be interrupted at any time using the
[STOP] key.
Use the conditioning program at least once a week to enhance correct and long-lasting pump
operation. It is also advisable to run the program before using the machine for the first time
and after the machine has been stationary for a lengthy period of time.
Oil maintenance
Check before starting the machine the oil in the pump. If there is too little oil or the
quality of the oil is bad (unclear), replace or refill the oil before operating the
machine.
Always change the oil before a long period of inactivity of the machine and make
sure the pump is clean and free of moisture.
Changing Oil / Filling Up
Draining oil
If the oil is white or unclear when checked then it must be replaced. Before draining off the oil
let the conditioning program run a full cycle. The dirt and moisture will be absorbed by the oil
and the oil becomes thinner making draining easier. After the program has ended the oil
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman Lynx 42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman Lynx 42 in the language / languages: English as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman Lynx 42

Henkelman Lynx 42 User Manual - German - 56 pages

Henkelman Lynx 42 User Manual - Dutch - 50 pages

Henkelman Lynx 42 User Manual - French - 49 pages

Henkelman Lynx 42 User Manual - Spanish - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info