647374
35
Zoom out
Zoom in
Previous page
1/43
Next page
BOXER / MARLIN / FALCON / POLAR SERIES USER MANUAL
Version 06.03 DIG.EN 35
ERROR CODES
The controls are programmed with a number of error codes. These error codes are intended to give the user / dealer a
clear indication of what the possible cause might be why starting or packaging is not working as expected.
F1: This code indicates that the cycle (cover switch) will be interrupted prematurely.
Example: the cover of the machine closes after starting, but before sufficient vacuum is present to keep the cover closed
the operator lets go of the cover. The F1 code will now be shown on the display.
In a time-controlled machine, the time for gassing is set in such a way that the entire chamber is gassed and the cover
opened without sealing taking place. Here too the F1 code will immediately be shown on the display.
This message will never be shown directly after the controls are started, but during the course of the cycle.
F2: This code indicates that the sensor is not working properly.
When the controls are started, the condition of the sensor is checked. If the feedback data of the sensor are not correct,
F2 is shown on the display. This message will be shown directly after the sensor controls are started.
RP-: This message will be shown when, due to circumstances, the controls are unable to retrieve the programme values.
The word ‘circumstances’ means peak tensions or a tension drop during starting. When such a situation occurs, the print
will start with this message and go no further. Two options exist now: the machine can be switched off and on again to
see if the problem repeats itself or the reprog key can be pressed. By operating the reprog key, the controls will use the
factory settings to start. The programme values set by the client will be cancelled as a result.
This message will be shown directly after the controls are started.
If one or more of the above messages continue to occur regularly or cause a direct problem, we advise you to contact
your dealer.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman FALCON at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman FALCON in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman FALCON

Henkelman FALCON User Manual - German - 44 pages

Henkelman FALCON User Manual - Dutch - 43 pages

Henkelman FALCON User Manual - French - 46 pages

Henkelman FALCON User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info