Manual Hendi KCR 96 V (page 12 of 26) (English)

741196

Zoom out

Zoom in

1/26

_ TECNOEKA Srl _________________________________________________________ use and instruction manual _

_ page 12 ________________________________________________________________________________________

- Remove the pot support grids from the

cook-top and remove the mobile parts of

the burners from their position.

- By means of the tool provided, unscrew

the threaded ferrules “A” (Fig. 3) securing

the burners to the cook-top.

- Remove the chromium plated rings “B”

ensuring not to damage the cables

connected to the ignition plugs.

- Remove the elastic rings “C” securing the

thermocouples to the cook-top.

- Unscrew the 3 screws securing the central

burner (triple crown) to the cook-top.

- Unscrew the 4 screws securing the cook-

top to the rest of the cooker and which

are located on the two sides of the cook-

top itself.

- Carefully lift the cook-top and remove it,

so that the burner area can be easily

accessible.

- Replace the “U” nozzles with those that

are more suitable for the new type of gas

(check table 2), making sure that the

correct diameter is stamped on them.

- Set the new primary air intake regulating

the right distance between the adjustment

tools positioned at the entrance of the

“Venturi” pipe of the burners.

- For fast and semi-fast burners (Fig. 4)

loosen the check nut “D”, rotate the

ferrule “G” so as to adjust the distance

between the ferrule and the nozzle holder

“P” to an H value indicated in table 2.

Tighten the check nut “D”.

Fig. 4

Fig. 5

- For the triple crown burner (Fig. 5), loosen the “V” screw securing the adjustment bush

“B” and set the bush to an H distance from the base, respecting the value indicated in

table 2. Tighten screw “V” again.

- Having replaced the main nozzles of the burners and having adjusted the primary air,

seal the adjusted tools with varnish.

Reassemble all the components removed in reverse order and stick the new data on the

technical data plate.

N.B. Removing the rear panel of the appliance, all the re-assembly operations of the burners

can be simplified.

Minimum level adjustment - Burner minimum levels are preset for methane gas (G20)

operation. If operating on liquid gas (G30/G31) proceed as follows: ignite the burner at

minimum position, and, using a screwdriver, fully tighten the by-pass adjustment screw at the

side of the shank of the relevant tap. Check if the flame remains stable and uniform – to help

you check, rapidly turn the tap knob from maximum to minimum position. When you have

. 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi KCR 96 V in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hendi KCR 96 V

Hendi KCR 96 V User Manual - German - 26 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi KCR 96 V Manual

Product: