741238
6
Zoom out
Zoom in
Previous page
1/72
Next page
6
EN
Preparations before using for the first time
Remove all protective packaging and wrapping.
Check to make sure the appliance is undamaged.
In case of incomplete delivery and damages.
Please contact supplier (See ==> Warranty).
Clean the appliance before use (See ==> Cleaning
and Maintenance).
Make sure the appliance is completely dry.
Place the appliance on a horizontal, stable and
heat resist surface that is safe against water
splashes.
Ensure that there is sufficient ventilation. Keep
a minimum distance of 15 cm around the appli-
ance.
Do not place the appliance in close proximity to
devices which are sensitive to disturbances by
magnetic sources (e.g. radios, tape decks).
Note: Due to manufacturing residues, the appli-
ance may emit a slight odor in the first few cycles.
This is normal and does not indicate any defect or
hazard. Make sure the appliance is well ventilated.
Suitable cooking equipment
Suitable Not suitable
Bottom of cookware Flat bottom
Curved, uneven, rounded bottom
Material Cookware with iron, cast iron, mag-
netic stainless steel or enamelled iron
bottom.
Cookware with ceramic, glass, copper,
bronze, or aluminium bottom.
Diameter of the bottom Between 12 cm and 23 cm. Less than 12 cm or more than 23 cm.
Type of cookware Cookware with a bottom thickness
over 1.5 mm.
Completely closed containers or cans.
Note: Using a pan or pot that’s not suitable for induction cooking may damage the appliance.
Operation
Place a suitable pan or pot at the centre of the
heating surface of the appliance. (See --> Suita-
ble pans for the appliance).
Note: Do not place empty pan as this may dam-
age the pan and the appliance.
Connect the power plug to a suitable electrical
supply outlet. On/Standby button (1) will be light
up and the appliance now in Standby mode.
Switch On the appliance by pressing On/Standby
button (1) first and Function setting (2) second.
Then the power function is on. The appliance is
ready for cooking. If the timer is not set, the ap-
pliance will operate continuously.
Set power / temperature / timer function by fol-
lowing description.
Once you have finished cooking, switch to standby
mode by pressing the On/Standby button (1). The
digital display (4) and all buttons will go off except
On/Standby button (1).
Note: If no any button on the control panel is
pressed during operation for 2 hours, the appli-
ance will then switch to Standby mode automat-
ically.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi Inductiekookplaat 2000W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi Inductiekookplaat 2000W in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info