741725
131
Zoom out
Zoom in
Previous page
1/140
Next page
ERROR CODES
Error Items Code Error Beep Cause Remedy
Power frequency
Error (50/60Hz)
E1 One long beep
for 2 sec
Power frequency is
other than 50 Hz.
Unplug the power cord plug and check if the power frequency is 50 Hz.
Plug the power cord in 50 Hz power source and see If “E1” appears. If the
error code is displayed again even after the correct power source is provided,
contact the nearest service centre.
Thermistor Open
Error
E21 One long beep
for 2 sec
Thermistor Sensor
which is supposed to
sense the temperature
of the cavity inside does
not work properly.
(Thermistor Sensor
open)
Unplug the power cord and wait for more than 10 seconds. Plug the power
cord again. If the symptom persists, contact the nearest service centre.
Thermistor Short
Error
E22 One long beep
for 2 sec.
Thermistor Sensor
which is supposed to
sense the temperature
of the cavity inside does
not work properly.
(Thermistor Sensor
short)
Unplug the power cord and wait for more than 10 seconds. Plug the power
cord again. If the symptom persists, contact the nearest service centre.
Temperature of
exhaust air too High
Error
E3 One long beep
for 2 sec
The oven cavity
gets too hot due to
excessive operation
with no load or small
load, or due to some
blocking materials
around the Air Filter or
Air Exhaust at the back
of the oven.
Open the oven door and check if 1) the oven has been operating with no
load or too small load, 2) the air filter is placed in a wrong position, or 3) any
blocking materials exist around the Air Exhaust. Cool down the oven (for
approx. 30 min) under the normal temperature. The oven is back to normal
when the error code “E3” disappears and “ON” appears again in the display
window.
Unplug the power cord, remove the blocking materials around the ventilation
openings, cool down the oven (for approx. 30 min) sufficiently, plug the power
cord in again and check if the error code appears again.
If the symptom persists even when the oven is cooled down sufficiently,
contact the nearest service centre.
HVT-I Power Error E41 One long beep
for 2 sec
The circuitry inside the
oven is not working
correctly.
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code “E41” appears again.
If the symptom persists, contact the nearest service centre.
HVT-II Power Error E42 One long beep
for 2 sec
The circuitry inside the
oven is not working
correctly.
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code “E42” appears again.
If the symptom persists, contact the nearest service centre.
CM1519A_XEU_04029B-01_EN.indd 11 12/14/2012 3:57:17 PM
131


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi CM1919A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi CM1919A in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info