741725
128
Zoom out
Zoom in
Previous page
1/140
Next page
8
ENGLISH
Whilst heating, one press on ( ) Button stops the oven. You can
restart it by pressing the ( ) Button or a second press on ( ) Button
will cancel the selected program. When it is NOT in a heating cycle,
one tap on ( ) Button cancels the selected program. You can set the
power level first and then the cooking time next, or vice versa. You can
press +20sec button one or more times in order to add the cooking time
by 20 seconds.
When heating cycle is completed and you open the door, the oven lamp
automatically turns on and goes off 1 min later.
When you open the door whilst in a heating cycle, the oven stops
operating and the oven lamp automatically turns on for 5 min and goes
off 5 min later. If you leave the oven door open for more than 5 min, the
oven beeps once every minute and after 5 min the power source check
indicator ‘ON’ appears in the display window.
When in a heating cycle, you can not change the power level or heating
time. But you can add 20 sec increments using the +20sec Button. The
dial may be rotated but this does not affect the current operation and
the display remains the same. It becomes effective next time you set the
oven manually after you finish the current heating. If
you want to change the current setting, firstly stop the heating by using
CANCEL Button and set desired power level and cooking time again.
But when you are NOT in a heating cycle, you can change the power
level and heating time. Changed values are promptly shown in the
display.
The oven is designed not to work when power level is set to “0” mode
between the heating mode and the defrosting mode.
When you first plug in the power cord, the oven beeps once and all the
indicators show for 5 sec in the display window.
POWER LEVELS AND TIME VARIATIONS
The power level function enables you to adapt the amount of energy
dissipated and thus the time required to cook or reheat your food,
according to its type and quantity. You can choose between the power
levels below.
Power level
CM1919A CM1519A CM1319A
Percentage Output Percentage Output Percentage Output
HIGH ( )
100 % 1850 W 100 % 1500 W 100 % 1300 W
MEDIUM ( )
70 % 1295 W 70 % 1050 W 70 % 910 W
LOW ( )
50 % 925 W 50 %
750 W
50 % 650 W
HIGH
DEFROST (
)
20 % 370 W 25 %
375 W
30 % 390 W
LOW
DEFROST (
)
10 % 185 W 13 %
195 W
15 % 195 W
The cooking times given in recipes and in this booklet correspond to
the specific power level indicated.
Power level Max. Time
HIGH (
) 25 mins
MEDIUM (
) 40 mins
LOW (
) 40 mins
HIGH DEFROST (
)
50 mins
LOW DEFROST (
) 50 mins
The maximum time available per power level is shown in the table
above.
A defrosting time can be set up to 50 min. But the time is reduced to 25
min (for HIGH) or 40 min (for MEDIUM or LOW) the moment you change the
current power level (DEFROST) to other level such as HIGH, MEDIUM or
LOW.
Example : If you set a defrosting time to 45min with the heating mode
at DEFROST and if you change the power level to HIGH, the time will be
automatically reduced to 25min.
You can set the power level first and the cooking time next, and vice versa.
CM1519A_XEU_04029B-01_EN.indd 8 12/14/2012 3:57:16 PM
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi CM1919A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi CM1919A in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info