741731

Hendi CM1089A Manual

263
Zoom out
Zoom in
Previous page
1/264
Next page
English - 22
English - 23
07 TECHNICAL SPECIFICATIONS
Error Items Code Error Beep Cause
HVT-II Power
Error
E42 One long beep
for 2 sec.
The circuitry inside the oven is not
working correctly.
Remedy
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code “E42”
appears again. If the symptom persists, contact the nearest
service centre.
EEPROM Error
E5 One long beep
for 2 sec.
MemoryIC(EEPROMIC)isnot
working correctly.
In this case, other features except for
memory function work properly.
(You can operate the oven manually.)
Remedy
PressCANCELbuttononeormoretimesandtrytostarta
memory heating. If the error code “E5” persists, contact your
nearest service centre.
For any codes not listed above, or if the suggested solution does not solve the
problem,contactyourlocalSAMSUNGCustomerCareCentre.
Error Items Code Error Beep Cause
Thermistor
Short Error
E22 One long beep
for 2sec.
Thermistor Sensor which is supposed
to sense the temperature of the cavity
inside does not work properly.
(Thermistor Sensor short)
Remedy
Unplug the power cord and wait for more than 10 seconds.
Plug the power cord again. If the symptom persists, contact the
nearest service centre.
Temperature of
exhaust air too
High Error
E3 One long beep
for 2 sec.
The oven cavity gets too hot due to
excessive operation with no load or
small load, or due to some blocking
materials around the Air Filter or Air
Exhaust at the back of the oven.
Remedy
Open the oven door and check if 1) the oven has been operating
with no load or too small load, 2) the air filter is placed in a
wrong position, or 3) any blocking materials exist around the
AirExhaust.Cooldowntheoven(forapprox.30min)underthe
normal temperature. The oven is back to normal when the error
code “E3” disappears and “ON” appears again in the display
window.
Unplug the power cord, remove the blocking materials around
the ventilation openings, cool down the oven (for approx. 30 min)
suciently, plug the power cord in again and check if the error
code appears again.
If the symptom persists even when the oven is cooled down
suciently, contact the nearest service centre.
HVT-I Power
Error
E41 One long beep
for 2 sec.
The circuitry inside the oven is not
working correctly.
Remedy
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code “E41”
appears again. If the symptom persists, contact the nearest
service centre.
technical specifications
SAMSUNG strives to improve its products at all times. Both the design specifications and
these user instructions are thus subject to change without notice.
Model CM1089/CM1089
*
Power source
230 V ~ 50 Hz
Power consumption
Microwave 1600 W, 7 A
Output power
230V:1050W(IEC-705)
(4 power levels including defrost)
Operating frequency 2450 MHz
Cooling method Coolingfanmotor
Dimensions (W x H x D)
Outside
Oven cavity
517 x 297 x 412 mm
336 x 225 x 349 mm
Volume 26 liter
Weight
Net
Gross
17.5 kg
19.0 kg
CM1089A_XEU_DE68-03310E-03_EN_160629.indd 23 2016-06-29 �� 2:56:17
… 263


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi CM1089A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi CM1089A in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 13,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info