741185

Hendi 975336 Manual

4
Zoom out
Zoom in
Previous page
1/40
Next page
4
EN
1.1. IDENTIFICATION OF THE “INSTRUCTION HANDBOOK”
The Instruction Handbook is a document issued by
the Manufacturing Company and is an integral part
of the machine. This document is adequately identi-
fi ed for easy tracing and/or subsequent references.
All rights relating to the reproduction and disclosure
of the information contained in this handbook and
the documentation quoted and/or attached are re-
served.
1.2. AIM OF THE DOCUMENT
This handbook contains the information necessary to the customer and assigned personnel for the correct
installation, use and maintenance of the machine at good conditions and maximum safety.
1.3. SAFETY PRECAUTIONS AND MANUFACTURER’S RESPONSIBILITY LIMITS
All operator-machine interaction relating to the in-
tended use of the machine and its overall life cycle
has been carefully and thoroughly analysed during
the design phase and the drafting of the Instruction
handbook.
It is nevertheless understood that experience, ade-
quate training and “common sense” of the person-
nel operating on the machine are of primary impor-
tance.
These requirements are therefore considered indis-
pensable during all machine operating phases and
consultation of this handbook.
The non-observance of safety precautions or spe-
cifi c warnings indicated in this handbook, improper
use of all part of the supply, the use of unauthorized
spare parts, use of the machine by unauthorized
personnel, violate all safety standards regarding
supply design, construction and intended use of the
machine and relieve the manufacturer from every
liability in case of damage to persons or property.
The Manufacturing Company is therefore in no way
responsible for the non-observance by the user of
the safety precautions listed in this handbook.
1.4. REFERENCE TO STANDARDS
This document is draw up in accordance with following indications:
• Attachment
“I” of Machine Directive
89/392/CEE and subsequent issues: point 1.7.4;
• UNI EN 292/2 – 1992, point 5.5
Model HENDI 975336
Voltage 230 V, 50 Hz
Serial number
Date
Techniques coordinator
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 975336 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 975336 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info