741175

Hendi 975268 Manual

7
Zoom out
Zoom in
Previous page
1/116
Next page
7
EN
4.
If the machine was kept in a cold place (below
5°C), leave it for approx. 1 hour before starting.
5. Connect the power cable to the mains.
6. Set the on/o switch (blue switch at the back of
the machine) to ON position (switch raised - ma-
chine is ON).
INSTALLATION
7. Before starting the machine up, please read the
information on operation and safety included in
the manual.
8. Make sure that the oil level is at least at 1/2 or
1/3 of window height. When the appliance is
working, the oil level should not drop below 1/3
of the window height. Do not overll the ma-
chine as the oil may overow.
9. Place the machine in a vertical position in a well
ventilated and well lit room, without access of
any toxic gases or dust.
10. Make sure the machine is grounded.
11. Before turning the power on always check if the
top cover is open.
CONSUMABLES
• Oil - oil for the vacuum pump should be replaced
at least once every 6 months. We recommend
Victor Vacuum Oil available for purchase from the
manufacturer or distributor.
• Teon bar - Replace when burnt. Failure to do
so may cause damage to the sealing bar. Teon
bars may be purchased from the manufacturer
or distributor.
4. VACUUM PACKING PROCESS DESCRIPTION
1. Connect the machine to power source.
2. Flip the blue switch at the back of the machine
upwards.
3.
Turn the machine using the “ON” button - “- -”
will
light up on TIME(S) display. (for a dozen or
so seconds up to a few minutes). Changing of
settings will be impossible then.
4.
Press SET button (parameter selection) - “VACU-
UM”
LED will light up. Set the desired vacuum
value
by pressing “+” button to increase or “-” to
decrease vacuum level. Time range is 0-99 sec-
onds. The result will shown on TIME(S) display.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 975268 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 975268 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 4,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info