742016

Hendi 580233 Manual

4
Zoom out
Zoom in
Previous page
1/40
Next page
4
EN
Preparation before first use
• Remove all the packing material and protection
film (if applicable).
• Check to make sure the appliance is undamaged.
In case of any damage, contact the supplier im-
mediately and DO NOT use the appliance.
• Clean the weighting platform (5) with a slighted
damped cloth.
• This is a battery-operated scale. Insert 3 x 1,5V
batteries (Type: AAA, not supplied) in the battery
compartment (4) which is at the bottom of the
scale. (See = = > Insert the batteries)
• Press “ON / OFF” button (3). The scale is now
ready for use.
Insert the batteries
• Open the battery compartment cover at the bot-
tom of the appliance.
• Insert 3 x 1,5V batteries (Type: AAA, not included)
according to the polarity markings (+) and (-) on
the batteries and inside the battery compartment
(4).
• Close the compartment cover. The LED display (2)
first as below:
TARETARE
g
• After few seconds, the LED display (2) as below:
g
Note: When the symbol appears on the LED
display (2), the batteries are going to exhaust.
Then, you should replace with a new set of batter-
ies. Please replace all 3 batteries at the same time.
DO NOT mix up the new and old batteries.
DO NOT dispose of exhausted batteries together
with the other household waste. Please follow the
local ordinances and recycling instruction.
Operation
(A). Weighting mode
• Place the appliance on a level, stable, clean,
heat-resistant and dry surface.
• Before switch on the scale, DO NOT put any ob-
jects on the weighting platform (5).
• Press the ON / OFF button (3) to switch ON the
appliance in ready mode.
• Next, place the object that you want to weight on
the weighting platform (5).
(B). Measure with a TARE function
• This TARE function allows user to weight different
object consecutively without removing previous
object from the weighting platform (5). E.g. Sub-
tract the weight of the container as below.
1. When the appliance is OFF, press the ON / OFF
button (3) to enter weighting mode. You can
start to weight when “0” is shown on the LED
display (2).
TARETARE
ON/OFFON/OFF
g
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 580233 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 580233 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info