Manual Hendi 282338 (page 4 of 164) (English, German, Dutch, French, Italian, Polish)

741099

Zoom out

Zoom in

1/164

• Never use accessories other than those recommended by the manufacturer. Failure to do

so could pose a safety risk to the user and could damage the appliance. Only use original

parts and accessories.

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge.

• This appliance must not be used by children under any circumstances.

• Keep the appliance and its cord out of reach of children.

• Always disconnect the appliance from the mains if it is left unattended or is not in use,

and before assembly, disassembly or cleaning.

• Never leave the appliance unattended during use.

• The appliance is not for continuous use.

Intended use

• The appliance is intended for professional use.

• This appliance is solely intended for grinding

meat. Any other use may lead to damage of the

appliance or personal injury.

• Operating the appliance for any other purpose

shall be deemed a misuse of the device. The user

shall be solely liable for improper use of the de-

vice.

1. General information and characteristics

Meat mincer designed to be used with plate holes

diameter smaller or equal to 8mm.

The mincer – grater, here follow is called “ma-

chine”, è designed to mince, reduce of size fresh

meat not frozen, through cutting tools to obtain

meat sauce, hamburgers, meatballs and sausag-

es. The meat must be without bones, or other parts

of different consistency from the meat.

With the grater group placed on the opposite side

of the machine, to grater tough cheese, bread and

biscuits.

The machine is constituted from an electric motor

inserted in a unique merger (basic machine body).

In some versions the merger can be recovered

from a bonnet (hulled machine body).

The meat to grind, is loaded manually in the load

hopper, placed in the superior zone of the machine

and always manually and with the pestle help is

introduced in the grinding neck towards the Archi-

medean screw.

The hopper is blocked to the machine neck. The

pestle is of plastic material suitable for the contact

with food products.

The plate in turn is pressed against the cutter from

the wheel inserted on the grinding group mouth.

The grinding group is dismanteable, all direct con-

tact materials with the food material are in con-

formance with the actual hygienic standards for

food.

In accordance with the functioning requirements

and production, the machine can be constituted

with different optional parts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 282338 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 282338 Manual

Product: