741720

Hendi 281369 Manual

11
Zoom out
Zoom in
Previous page
1/128
Next page
11
EN
Cleaning and maintenance
• Always remove the plug from the socket be-
fore cleaning the microwave.
• Beware: Never immerse the microwave in
water or any other liquid!
• Clean the outside of the microwave with a
damp cloth and water with mild detergent.
And dry afterwards.
• Clean the inside and door with a damp cloth
and water with mild detergent to remove all
food and grease build up.
• Remove any spillage right after each use. Not
cleaning can result in burnt is stains and bad
smells.
• Keep the sealing gaskets on the door clean,
clean them regularly with a wet cloth and wa-
ter with a mild detergent.
• Never use aggressive cleaning agents or
abrasives. Do not use any sharp or pointed
objects. Do not use petrol or solvents! Clean
with a damp cloth and detergent if necessary.
Do not use abrasive materials.
• Clean the grease and air filter regularly, the
microwave might overheat when this isn’t
done properly or food will get contaminated
with grease.
Trouble shooting
The following events can be considered as nor-
mal effects of working with this microwave.
• Radio and TV reception may be interfered
when the microwave is operating.
• The light of the oven might be dimmed when
operating.
• During heating steam can come from the
food and can accumulate on the cooler parts
of the microwave like for instance on the
door.
Trouble Possible cause Solution
Microwave doesn’t
start working
Power cord not plugged in
correctly.
Check if the power cord is plugged in correctly.
Fuse blown of circuit
breaker active.
Replace fuse or reset circuit breaker. If not sure how
to do this contact your supplier.
Power outlet defective Test outlet with other appliance and check circuit
breaker.
Oven doesn’t heat Door not closed correctly Check the door if it closes properly, if it can’t be
closed properly contact your supplier.
The display shows
‘E-01’ or ‘E-02’
Temperature sensor
broken
Unplug the microwave from the power outlet and wait
10 seconds before plugging the power cord back in.
If the problems isn’t solved after this contact your
supplier.
The display shows
‘OVEN IS HOT DO NOT
OPEN THE DOOR’ for
item no.: 281369 only.
Warning is activated by the
high temperature in the
chamber.
Wait 3 minutes, the microwave will cool down. Check
is the vents are clear. Never use the microwave
without food in it, don’t overheat food. If the problem
isn’t solved after these steps contact your supplier.
Light and fan make
noise when the
microwave finished
operating.
High temperatures. This is normal, the lamp and fan stop when the
microwave has cooled down enough. If they don’t stop
working unplug the microwave from the power socket
and wait 10 seconds before plugging back in. If this
doesn’t solve the problem contact your supplier.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 281369 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 281369 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info