741720

Hendi 281369 Manual

8
Zoom out
Zoom in
Previous page
1/128
Next page
8
EN
Door Open Mode
Door open mode is activated by opening the door. During this mode, the screen is blank. And the fan
and oven lamp work. During operation, when the door is opened the program will be paused, the fan
keeps rotating and the light is on.
Manual Entry Mode
Make sure the microwave is under Ready Mode.
Select the time with the ‘ ’ button, the dis-
play will show “00:00”, select the requested
time with the number keyboard. After that, se-
lect the power level by pressing [0%/20%(De-
frost)/50%/70%]. The display will show the se-
lected power. If you press again the same power
level button, the power will be set back to 100%
power. Also, if no power level button is set,
the power will be default to 100% power. When
everything is set, press the ‘u’ button, now the
microwave will start operating. At the end of
the cycle the display will show ‘DONE’ for item
281369, 281413 or ‘End’ for item 281444.
Pause Mode
This mode allows users to pause the cycle to
inspect or stir the food while the microwave
is operating. Open the door or press the ‘
’ button to pause the cycle. The display will
show the remaining time. To resume the cycle,
close the door and press the ‘ ’ button. When
nothing is done the microwave will go into idle
mode within 1 minute.
Preset program mode
This microwave comes with 10 preset pro-
grams. When the microwave is in ‘
Ready Mode
’
press one of the number keys and the micro-
wave will run the program. Below you’ll find
the 10 preset programs. When operating the
microwave shows the remaining time in the
display, when it’s a multi-stage program the
total remaining time will be displayed.
Button 1 2 3 4 5 6 7 8 9 0
281369 Display
time
0:10 0:20 0:30 0:45 1:00 1:30 2:00 2:30 3:00 3:30
281413 Display
time
0:10 0:20 0:30 0:45 1:00 1:30 2:00 3:00 4:00 5:00
281444 Display
time
0:10 0:20 0:30 0:45 1:00 1:30 2:00 3:00 4:00 5:00
Programming
This microwave can preset up to 99 programs.
See and follow “User options - 9 Double digit”
session for setting program no. from 10 to 99.
Open the door, then press and hold number “1”
on the number keyboard for about 4 ~ 6 sec-
onds, the buzzer will sound and the display will
show ‘PROGRAM’ for item no. 281369, 281413
or ProG for item no.: 281444 to indicate you
entered program mode. Select the time with
the ‘ ’ button, the display will show “00:00”,
select the requested time with the number
keyboard. After that, select the power level.
Press the power level buttons [0%/20% (de-
frost) /50%/70%], the display will show the
selected power. If you press again the same
power level button, the power will be back to
set 100% power. Also, if no power level button
is set, the power will be default to 100%. Af-
ter setting the time, power and press the ‘
’ button to save the program. The display will
show ‘PROGRAM’ for item no. 281369, 281413
or ProG for item no.: 281444. Close the door to
return to ‘ready mode’. If you want to cancel
during programming, press the ‘ ’ button and
the oven will return to the ‘door open’ mode
and the program won’t be saved.
Below a quick guide how to make a program of
1.25 minutes at 70% power:
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 281369 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 281369 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info