741676

Hendi 273906 Manual

5
Zoom out
Zoom in
Previous page
1/46
Next page
5
EN
Preparation for first use
• Check to make sure the appliance is undamaged.
In case of any damage, immediately contact your
supplier and do NOT use the appliance.
• Remove all packaging material and protection
film (if applicable).
• Clean the appliance as explained below at the
cleaning and maintenance topic.
• Position the appliance in such a way that the plug
is accessible at all times.
• Place the appliance on a level and steady surface,
unless mentioned otherwise.
• Place the support arm into the stand.
• Set the height of the support arm and insert the
screw to lock the arm in place.
• Tighten the mounted light bulbs well.
• The new light bulbs will process fumes for about
3 till 4 hours (smoke & odor).
Note: GN container not included! Suitable for GN
1/1 container.
Usage
• Insert the 2 light bulbs (included).
• Insert the plug into a grounded socket. ATTEN-
TION! There is a chance for electrical shocks
when not using a grounded socket.
• Turn on the appliance using the switch.
• Place the food in a pan or equivalent directly un-
der the light bulbs for the best results.
• If you don’t use the appliance anymore the appli-
ance can be turned off using the switch.
• If the appliance is not being used for a longer
period of time, remove the plug from the socket.
• ATTENTION! The light bulbs and other parts of
the appliance can get hot while operating the ap-
pliance.
• ATTENTION! Allow the appliance to cool down
completely before touching it.
Cleaning and maintenance
• Always remove the plug from the socket before
cleaning the appliance.
• Beware: Never immerse the appliance in water
or any other liquid!
• Clean the outside of the appliance with a damp
cloth (water with mild detergent).
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary. Do not use
abrasive materials.
• Turn off the appliance before replacing any light
bulbs.
Troubleshooting
If the appliance does not function properly, please
check the below table for the solution. If you are
still unable to solve the problem, please contact the
supplier/service provider.
Storing Possible cause Possible solution
The appliance does
not work
The plug is not plugged (correctly) into
the electrical outlet.
Check the plug
Switch is off Turn the switch on
Light bulbs are loose or are defective Tighten or replace the light bulb
Lamp bulb has burnt out. Replaced the bulb with the same type
and rating.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 273906 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 273906 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info