741688
5
Zoom out
Zoom in
Previous page
1/64
Next page
5
EN
Main parts of the appliance
1. Internal wires of power cord: Connection with
the electrical wires from the power system
2. Hooking hole: Hanging the lamp to the ceiling
3. Rotating knob: Adjusting the power cord length
4. Cap cover: Fix the length of the power cord after
setting
5. ON (I) / OFF (0) switch: Switch ON / OFF the lamp
6. Lamp shade: Control the direction of the light
Preparations before first use
• Remove all protective packaging and wrapping.
Check to make sure the appliance is undamaged.
In case of incomplete delivery and damages, DO
NOT use the appliance. Please contact supplier
(See ==> Warranty).
Clean the appliance before use (See ==> Cleaning
and Maintenance).
Make sure the appliance is completely dry.
Multiple installations of the lamps must have a
minimum distance of 40 cm between centre of
the shade of each unit.
Keep a minimum of 30 cm distance from the
walls and other flammable or colour-sensitive
objects.
Preparation before installation
CAUTION: Before installation, check the appliance
to make sure there is no damage. CLOSE the elec-
trical power circuit system & switch OFF the appli-
ance before starting installation work.
Attention! Installation work should be carried out
by qualified electrician. Contact your local authority
for advice if have question. DO NOT attempt to in-
stall, repair and maintenance by yourself.
Verify prior to installation that the ceiling can
safely support the appliance.
Make sure that no electrical wires, water pipes,
gas pipes or other lines are located around the
installation location.
Consult a qualified contractor for assistance
about the structure of the ceiling. This is to en-
sure that the installation is carried out properly
and safely.
Switch OFF the appliance by pressing the switch
(5) on the appliance at the “0” position.
Attention: Before starting the installation, make
sure you have all the tools such as screwdriver,
electric drills, measuring tape, marking pencil,
wall anchors, wiring nuts, mounting bracket with
hook, etc. (All are not supplied) and make sure they
are well functioning.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 273883 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 273883 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info