741679
7
Zoom out
Zoom in
Previous page
1/64
Next page
7
EN
7
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still
unable to solve the problem, please contact the supplier/service provider.
Problems Possible causes Possible solutions
The wires of the appliance are
connected to power circuit sys-
tem but not working at all.
The internal wires are not connected
properly to the electrical power cir-
cuit system.
Check again to make sure it is
connected properly.
Appliance not turned on.
Turn on the appliance by pressing the switch
at the “I” position.
ON / OFF switch defective Contact the supplier.
Lamp bulb has burned out.
Replaced the bulb with the same types and
same rating.
The appliance is turned on but
there is no light.
No power to the appliance
Check the circuit breaker and reset as nec-
essary of the system by qualified technician.
ON / OFF switch defective Contact the supplier.
Lamp bulb has burned out.
Replaced the bulb with the same type and
same rating.
Heat is inadequate
The appliance is mounted too high to
the target area.
Lower the mounting height to closer to the
heated area.
Incorrect lamp bulb wattage.
Verify lamp bulb and replace with the correct
wattage bulb. Do not exceed maximum lamp
bulb wattage.
Heat is excessive
The appliance is mounted too close
to the target area.
Increase the mounting height if too close.
Lamp bulb wattage is too high.
Check the bulb wattage and replace with
lower wattage bulb.
Technical specification
Item 273869 273876 273845 273883 273890 273852
Supplied voltage &
frequency
220 – 240V ~ 50/60Hz
Rated power Max. 250W
Protection class Class I
Max loading Up to 5kg
Length of retracta-
ble power cord
70 to 150 cm
Minimum distance
from lamp bulb
0,3 m
Colour of the shade Silver Copper black Silver Copper black
Shape of shade Cone Cylinder
Dimension of the
shade
ø275x(H)215mm ø175x(H)225mm
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 273852 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 273852 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info