741516
6
Zoom out
Zoom in
Previous page
1/52
Next page
6
EN
Cleaning and Maintenance
Risk of electric shock!
Do not let water or liquids enter the appliance!
Always unplug the appliance from the electrical
power supply supply before cleaning and storage.
Risk of burns!
Make sure the grid have cooled down completely
before cleaning.
Clean the appliance after each use.
Properly dispose of the oil in the dripping tray.
The gird and the dripping tray are removable for
cleaning.
Drop a little edible oil on stubborn residues on the
grid and dripping tray. Let these soak for approx.
20 minutes.
Wipe the grid, dripping tray and the housing with
a slightly damp cloth.
Avoid strong cleaning agents or scouring pads as
these may damage the grid and the dripping tray.
Keep the appliance in a clean and dry location,
away from the direct sunlight.
Keep the appliance out of reach of the children
for storage.
Troubleshooting
If the appliance does not function properly, check
the below table to find a solution. If you are still
unable to solve the problem, contact the supplier/
service provider.
Symptom Possible Cause Solutions
Appliance is not working at all
and all the lights are off.
- Appliance not plugged in.
- Circuit breaker triggered.
- Internal power malfunction.
- Plug the appliance into a work-
ing power supply.
- Check the circuit breaker of
the power supply.
- Contact supplier.
Appliance is not heating, the
green light is on and the orange
light is off.
- Temperature regulator defec-
tive.
- Temperature regulator in the
‘off’ position.
- Contact supplier.
- Turn the knob of the tempera-
ture regulator to switch it on.
Appliance is not heating, the
green light and orange light
are on
- Heating element defective. - Contact supplier.
Circuit breaker is triggered
when the appliance is switched
on.
- Overload of the power supply.
- Internal Short-circuit.
- Connect the appliance to suit-
able power supply (16 Ampère).
- Check if there are other
appliances on the same circuit
breaker.
- Contact supplier.
Appliance is not hot enough or
too hot
- Temperature regulator defec-
tive.
- Incorrect height of the heating
element.
- Contact supplier.
- Decrease or increase the
height of the upper housing
(heating element).
Upper housing can’t be moved
up or down.
- Upper housing blocked by
external object.
- Internal mechanical defect.
- Remove the external object to
free the upper housing.
- Contact supplier.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 264607 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 264607 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info