741525

Hendi 264300 Manual

6
Zoom out
Zoom in
Previous page
1/52
Next page
6
EN
Use
• Connect the plug with an electrical socket.
• Place the crumb tray in the appliance.
• Rotate the temperature dial (lower dial) to start
heating.
• The orange light will go on until the desired tem-
perature is reached.
• Rotate the timer to the desired time.
• The green light will go on until the desired time
is reached.
Note: The orange light might go on when the tem-
perature drops, the machine will start reheating till
the desired temperature is reached again.
Cleaning and maintenance
• After use, unplug the appliance from the power
socket and let it cool down.
• Clean the inside and outside of the body, grid and
crumb tray with luke-warm water, a mild deter-
gent and a soft cloth. Don’t clean the heating el-
ements.
• Use a brush to remove any encrustations from
the grid.
• Dry all parts with a dry cloth before storing the
salamander.
• Note! Do not clean the appliance with aggressive
chemicals or abrasives in order to prevent dam-
age to the surface.
Trouble shooting
If the appliance does not function properly, please check the below table for the solution. If you are still unable
to solve the problem, please contact the supplier/service provider.
Problem Possible cause Solution
Turn temperature dial in the off posi-
tion and power light stays on
Fuse broken Contact the supplier.
Power is connected but the salaman-
der doesn’t heat up.
Check if the overheating protector is
malfunctioning
Contact the supplier.
Indicator light doesn’t work while the
salamander is heating up.
Indicator light not connected Contact the supplier.
Indicator light broken Contact the supplier.
Technical specifications
Item 264119 264201 264300
Operating voltage & frequency 220-240V~ 50/60Hz
Rated power 2000W 2200W 3600W
Protection class Class I
Waterproof protection class IPX4
Timer setting range 30 mins
Temperature setting range 50 °C to 300 °C
Remarks: Technical specification is subjected to change without prior notification.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 264300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 264300 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info