741748
7
Zoom out
Zoom in
Previous page
1/68
Next page
7
EN
Operation
Make sure the heating control knob is switched
to the 0 position.
Connect the power plug to a suitable electrical
power outlet.
Power ON the appliance by turning the Heating
control knob to the desired setting (Full power/
Low power/Upper heating only). The power indi-
cator will be light up in green.
Place the sliced bread on the conveyor by using a
tong (not supplied) to avoid danger of heat burn.
Ensure the bread is evenly placed.
Rotate the Speed control knob to adjust the
speed of the conveyor & thus the browning even-
ness of the toasted bread.
When not in use, set the Heating control knob to
the “0” position.
Unplug the appliance from the electrical power
outlet.
Allow the appliance to cool down completely be-
fore cleaning or storage.
Note: Due to manufacturing residues, the appli-
ance may emit a slight odor. This is normal and
does not indicate any defect or hazard. Make sure
the appliance is well ventilated.
Cleaning and Maintenance
Attention:
Always unplug the appliance from the electrical power outlet and let it cool down completely before
cleaning and storage.
Clean the appliance regularly and any food resi-
dues removed.
CAUTION! Never use any abrasive or hard objects
for cleaning.
Clean the appliance with luke-warm water and
a soft cloth.
Do not use water jet or steam cleaner for clean-
ing and do not push under the water.
No any parts can be cleaned in the dishwasher.
Parts How to clean Remark
All accessories
such as trays, etc.
- Soak in warm, soapy water for about 10 to 20 minutes.
- Rinse under running water thoroughly.
Dry all parts well at
last.
External surfaces - Wipe clean with a soft cloth and a little mild detergent.
Make sure no water or moisture enters inside the of the
appliance.
Storage
Always make sure the appliance has already
been disconnected from the electrical power out-
let and cool down completely.
Store the appliance in a cool, clean place.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 261309 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 261309 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info