Manual Hendi 239698 (page 7 of 76) (English, German, Dutch, French, Italian, Polish)

741211

Zoom out

Zoom in

1/76

Preparations before using for the first time

• Remove all protective packaging and wrapping.

• Check to make sure the appliance is undamaged.

In case of incomplete delivery and damages.

Please contact supplier (See ==> Warranty).

• Clean the appliance before use (See ==> Cleaning

and Maintenance).

• Make sure the appliance is completely dry.

• Place the appliance on a horizontal, stable and

heat resist surface that is safe against water

splashes.

• Ensure that there is sufﬁcient ventilation. Keep a

minimum distance of 15cm around the appliance

bottom of cookware

• Do not place the appliance in close proximity to

devices which are sensitive to disturbances by

magnetic sources (e.g. radios, tape decks).

Note: Due to manufacturing residues, the appli-

ance may emit a slight odor in the ﬁrst few cycles.

This is normal and does not indicate any defect or

hazard. Make sure the appliance is well ventilated.

Suitable cooking equipment

Suitable Not suitable

Bottom of cookware Flat bottom

Curved, uneven, rounded bottom

Material Cookware with iron, cast iron, magnetic stainless

steel or enamelled iron bottom.

Cookware with ceramic, glass, copper,

bronze, or aluminium bottom.

Diameter of the

bottom

239698 Between 14 cm and 32 cm. Less than 14 cm or more than 32 cm.

239711

Between 14 cm and 28 cm. Less than 14 cm or more than 28 cm.

239872

Type of cookware Cookware with a bottom thickness over 1.5 mm. Completely closed containers or cans.

Note: Using a pan or pot that’s not suitable for induction cooking may damage the appliance.

Operation

• Put the plug in the socket.

• Set the pan of your choice on the cooking surface,

bearing the above-mentioned instructions in

mind. NOTE! Make sure that the pans are cover-

ing the indicated zones at all times during use in

order to prevent the appliance from getting dam-

aged. Do not leave your pan on the burner while

empty as this may lead to damage to your pans.

• Switch the appliance on by pressing the “ON/

OFF” and then the “ARROW UP” key. If your pan

is suitable for induction and has a bottom diam-

eter of 14 cm, at minimum, the appliance will go

into operation. You will recognise this from the

fact that the fan will go on and the display will

show a capacity position of “2000”. NOTE! If the

appliance beeps after being switched on, the pan

you are using is not suitable for induction or the

appliance is defective. In case of any doubt, al-

ways contact the supplier of your pan!

• Once the appliance is operating and the display

indicates position “2000”, you can programme

the appliance in one of the following two ways:

1. Capacity control: You can control the perfor-

mance of the appliance, just as for a gas cooker

via 17 positions ranging from 100W to 3500W.

The default position for the appliance is “2000”.

2. Temperature control: you can set the tempera-

ture between 35°C and 240°C in 5°C increments.

Standard position for the appliance is 100°C. AT-

TENTION! The programmed temperature is that

of the glass plate and not the temperature in the

pan!

• If you choose capacity control, select “heating”

using the “ Temp/heating” key. Now you can pro-

gramme the capacity required by means of the

arrow keys, 3500W being the highest and 100W

the lowest position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 239698 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 239698 Manual

Product: