Manual Hendi 239421 (page 7 of 72) (English, German, Dutch, French, Italian, Polish)

741233

Zoom out

Zoom in

1/72

Setting Temperature level

• During operation, press the temperature button

(7) to activate. The indicator light (7) will light up.

• Use the increase setting (3) or decrease setting

button (5) to increase or decrease the tempera-

ture level (Range: 35°C ~ 240°C). Default setting

is 100°C. Higher temperature level is suitable for

roasting, grilling or frying.

Setting Timer

• After power or temperature setting for cooking,

you can opt for timer setting. Press the timer but-

ton (2) to activate. The indicator light (2) lights up.

• Use the increase setting (3) or decrease setting

button (5) to increase or decrease the cooking

time (Range: 0 min ~ 180 mins). Default setting

is 0 min.

• When the timer is set, it will be stored automat-

ically within 5 seconds. The appliance will then

start operation. It will display the remaining time

and the power setting / temperature setting al-

ternately on the display (4).

• The appliance will go into Standby mode when

the set time is elapsed.

• If the set time is reduced to “0 min” manually,

the appliance will go into Standby mode instantly.

Note:

1) Press and hold the increase setting button (3) or

decrease setting button (5) for fast adjustment.

2) After an extended period of operation, it is nor-

mal for the cooling fan inside to continue run-

ning in Standby mode for some time. Before

unplug the appliance, wait until the cooling fan

stops running.

3) The appliance’s surface is still hot after switch to

Standby mode. Wait completely cool down before

touching.

Error codes display

Error codes shown on the display (4) Possible cause Possible solution

E 1 The temperature of the appliance is

too high

Clear all obstacles that around the

appliance. Unplug the appliance, re-

move the pan or pot, wait until the ap-

pliance is completely cool down.

Cooling fan defective Contact the supplier.

E 2 The pan or pot is overheated.

Possibly, the pan becomes empty and

appliance will shut down for protec-

tion.

Unplug the appliance, remove the

pan or pot, wait until the appliance is

completely cool down. And make sure

water is inside the pan.

E 3 The supply voltage is abnormal. (Sup-

ply voltage is too high or too low)

Make sure that the appliance is con-

nected to a suitable electrical power

supply.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 239421 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 239421 Manual

Product: