Manual Hendi 239414 (page 8 of 76) (English, German, Dutch, French, Italian, Polish)

741227

Zoom out

Zoom in

1/76

Error codes displa

Error codes shown on the display (4) Possible cause Possible solution

E 1 The temperature of the appliance is

too high

Clear all obstacles that around the

appliance. Unplug the appliance, re-

move the pan or pot, wait until the ap-

pliance is completely cool down.

Cooling fan defective Contact the supplier.

E 2 The pan or pot is overheated.

Possibly, the pan becomes empty and

appliance will shut down for protec-

tion.

Unplug the appliance, remove the

pan or pot, wait until the appliance is

completely cool down. And make sure

water is inside the pan.

E 3 The supply voltage is abnormal. (Sup-

ply voltage is too high or too low)

Make sure that the appliance is con-

nected to a suitable electrical power

supply.

Cleaning and Maintenance

Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely

before cleaning and storage.

Cleaning

• Never immerse the appliance in water or other

liquids.

• Clean the cooled exterior surface with a slightly

damp cloth or sponge with some mild soap solu-

tion.

• Never use abrasive sponges or detergents, steel

wool or metallic utensils to clean the interior or

exterior parts of the appliance.

Storage

• Before storage, always make sure the appliance

has already been disconnected from the electri-

cal outlet and cooled down completely.

• Store the appliance in a cool, clean and dry place.

• Never put heavy objects on the heating surface

during storage as it may crack it.

Troubleshooting

If the appliance does not function properly, please

check the below table for the solution. If you are

still unable to solve the problem, please contact the

supplier/service provider.

• Error codes shown on the digital display (3). (See

--> Error codes display)

Problems Possible cause Possible solution

The appliance does not switch ON.

- Power plug is not connected proper-

ly with the electrical outlet.

- On/Standby (1) button is not pressed.

- Check the power plug to make sure

it is connected properly.

- Press the On/Standby (1) button to

start operation.

Cooling fan is operating even after

the appliance is switched to Standby

mode.

- This is normal. The cooling fan con-

tinues running in Standby mode for

some time to cool down all internal

elements.

- Wait until the cooling fan stops ro-

tating.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 239414 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 239414 Manual

Product: