Manual Hendi 239391 (page 6 of 72) (English, German, Dutch, French, Italian, Polish)

741223

Zoom out

Zoom in

1/72

Preparations before using for the first time

• Remove all protective packaging and wrapping.

• Check to make sure the appliance is undamaged.

In case of incomplete delivery and damages.

Please contact supplier (See ==> Warranty).

• Clean the appliance before use (See ==> Cleaning

and Maintenance).

• Make sure the appliance is completely dry.

• Place the appliance on a horizontal, stable and

heat resist surface that is safe against water

splashes.

• Ensure that there is sufﬁcient ventilation. Keep

a minimum distance of 15 cm around the appli-

ance.

• Do not place the appliance in close proximity to

devices which are sensitive to disturbances by

magnetic sources (e.g. radios, tape decks).

Note: Due to manufacturing residues, the appli-

ance may emit a slight odor in the ﬁrst few cycles.

This is normal and does not indicate any defect or

hazard. Make sure the appliance is well ventilated.

Suitable cooking equipment

Suitable Not suitable

Bottom of cookware Flat bottom

Curved, uneven, rounded bottom

Material Cookware with iron, cast iron, mag-

netic stainless steel or enamelled iron

bottom.

Cookware with ceramic, glass, copper,

bronze, or aluminium bottom.

Diameter of the bottom Between 12 cm and 23 cm. Less than 12 cm or more than 23 cm.

Type of cookware Cookware with a bottom thickness

over 1.5 mm.

Completely closed containers or cans.

Note: Using a pan or pot that’s not suitable for induction cooking may damage the appliance.

Operation

• Place a suitable pan or pot at the centre of the

heating surface of the appliance. (See --> Suitable

pans for the appliance).

Note: Do not place empty pan as this may damage

the pan and the appliance.

• Connect the power plug to a suitable electrical

supply outlet. On/Standby button (1) will be light

up and the appliance now in Standby mode.

• Then, switch On the appliance by pressing On/

Standby button (1) and Power button (6) will ﬂash.

• Next, choose to press either the power button (6)

or temperature button (7) to start cooking. If the

timer button (2) is not set, the appliance will op-

erate continuously.

• Once you have ﬁnished cooking, switch to Standby

mode by pressing the On/Standby button (1). The

digital display (4) and all buttons will go off except

On/Standby button (1).

Note: If no any button on the control panel is

pressed during operation for 2 hours, the appliance

will then switch to Standby mode automatically.

Setting Power level

• During operation, press the power button (6) to

activate. The indicator light (6) will light up.

• Use the increase setting (3) or decrease setting

button (5) to increase or decrease the power level

(Range: 100W ~ 2,000W). Default setting is 100W.

Higher power level is suitable for steaming.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 239391 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 239391 Manual

Product: