Manual Hendi 239346 (page 7 of 68) (English, German, Dutch, French, Italian, Polish)

741218

Zoom out

Zoom in

1/68

Operation

• Select the front or rear hob that you want to use.

Place a suitable cooking equipment at the centre

of the heating surface. (front or rear hob)

(See --> Suitable cooking equipment).

Note: Do not place empty cookware as this may

damage the cookware.

• Then, connect the internal wires of the power

supply cord to a suitable electrical supply.

(See --> Power supply line connection).

• Switch on the electrical power supply system.

• “- - - -“ will be shown on the display (2) and (3)

and the appliance is in STANDBY mode.

• After that, you can start to operate by turning the

knob (1) or (4) in clockwise direction depend on

which of the hob that you use (Front or rear hob).

• Power that you select will be shown instantly on

the display (2) or (3).

• Now, the appliance starts cooking operation. The

set power will be shown on the display (2) or (3)

during operation accordingly.

• After cooking ﬁnished, you can turn the appliance

to STANDBY mode by turning the knob (1) or (4) to

“0” position and “- - - -“ is shown on the display

(2) or (3) respectively.

Note:

1). After an extended period of operation, it is nor-

mal for the cooling fan inside to continue run-

ning in STANDBY mode for some time. Before

unplug the appliance, wait until the cooling fan

stops running.

2). The appliance’s surface is still hot even after

switch to STANDBY mode. Please wait the ap-

pliance completely cool down before touching

or cleaning.

3). Max power setting is 5000W for front hob and

3500W for rear hob respectively. When set the

front hob to 5000W, the max power of the rear

hob will then change to 2000W.

4). If no cookware is placed on the heating surface

during operation, it will switch off automatically

within 1 minute and beep sound will be heard.

Error codes display

Error codes shown on

the display (2) or (3)

Possible cause Possible solution

E 1 The temperature of the appliance is too

high

Clear all obstacles that around the appliance. Dis-

connect the appliance, remove the pan or pot, wait

until the appliance is completely cool down.

Cooling fan defective Contact the supplier.

E 2 The pan or pot is overheated.

Possibly, the pan becomes empty and

appliance will shut down for protection.

Disconnect the appliance, remove the pan or pot,

wait until the appliance is completely cool down.

And make sure water is inside the pan.

E 3 The supply voltage is abnormal. (Supply

voltage is too high or too low)

Make sure that the appliance is connected to a

suitable electrical power supply.

Cleaning and Maintenance

Attention: Always disconnect the appliance from the electrical power source and let it cool down completely

before cleaning and storage.

Cleaning

• Never immerse the appliance in water or other

liquids.

•

Clean the cooled exterior surface with a slightly

damp cloth or sponge with some mild soap solution.

• Never use abrasive sponges or detergents, steel

wool or metallic utensils to clean the interior or

exterior parts of the appliance.

Storage

• Before storage, always make sure the appliance

has already been disconnected from the electri-

cal outlet and cooled down completely.

• Store the appliance in a cool, clean and dry place.

• Never put objects on the heating surface as it

may crack the surface.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 239346 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 239346 Manual

Product: