741229

Hendi 239230 Manual

7
Zoom out
Zoom in
Previous page
1/80
Next page
7
EN
Operating the appliance
• Put the plug in the socket
• Set the pan of your choice on the cooking surface, bearing the above mentioned instructions in mind.
Note! Do not leave your pan on the appliance while empty as this may lead to damage to your pan.
• Switch the appliance on by pressing the “ON/OFF key”
and either the temperature key
or power key
to activate the appliance.
If your pan is suitable for induction and has a bottom diameter of 12cm, at minimum, the appliance will go
into operation.
If you have pressed the power key
, the appliance will enter in capacity mode operation and you will
recognize this from the fact that the fan will go on and the display will show a capacity position of “100”.
On the other hand, if you have pressed temperature key , the appliance will enter in temperature mode
operation, the default temperature is 100ºC.
Note! If the appliance beeps after being switched on, the pan you are using is not suitable for induction or
the appliance is defective. In case of any doubt, always contact the supplier of your pan!
Once the appliance is operating, it enters the Capacity mode by default, and the display indicates position
“100”, you can programme the appliance in one of the following ways.
• Capacity mode: You can control the performance of the appliance, just as for a gas cooker via 11 positions
ranging from 100W to 2000W.
• Temperature mode: you can set the temperature between 35ºC and 240ºC in 5ºC increments. Standard
position for the appliance is 100ºC.
NOTE: if we keep pressing the arrow keys, the SET temperature increases in a fast speed.
Attention! The programmed temperature is that of the glass plate and not the temperature in the pan!
• Capacity mode: If you choose capacity mode, press the “Power key”
, the lighting of the “Power key”
will be switched on. Default Capacity is 100W. Now you can programme the capacity required by means of
the arrow keys
&
, 2000W being the highest and 100W the lowest position.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 239230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 239230 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info