Manual Hendi 233795 (page 7 of 92) (English, German, Dutch, French, Italian, Polish)

742117

Zoom out

Zoom in

1/92

Indicator light status description

Symbol indicator Status Description

ON Under setting mode

OFF Operating under the setting condition

ON Compressor works and cooling active

OFF Compressor not works and cooling inactive

FLASH Preparing cooling process

ON Under refrigeration process

def

ON Under defrost process

Set the temperature

• Plug into a suitable electrical outlet.

• When set indicator light is OFF, press and hold

1a. button for 3 to 4 seconds until

is shown on

the display. Then, release the 1a. button & press

1a. button again.

• Next, press 1b. button to increase the setting

temperature by 1°C or press 1c. button to de-

crease by 1°C.

• After that, press 1d. button to conﬁrm the setting

and exit.

Note:

• If no button is pressed within 30 seconds, the

newly set temperature will be stored automati-

cally.

• The temperature setting ranges from 2°C to

10°C.

Defrost

•

The appliance will start defrost process automat-

ically for every 6 hours.

•

When def indicator is ON, the appliance is under

defrost process.

Shelf height adjustment

•

The height of each shelf can be adjusted.

•

Adjust the height of each shelf according to the

height of the items.

Installation instructions

•

Remove the appliance from the carton box, then

remove the external and internal packaging and

wrapping.

•

Check to make sure the appliance is undamaged.

In case of incomplete delivery and damages, DO

NOT use the appliance. Please contact supplier

(See ==> Warranty).

•

Let the appliance stand upright for about 2 hours.

This is to reduce the malfunction of the cooling

system from improper handling during transpor-

tation.

•

Clean interior surface with warm water and soft

cloth. (See ==> Cleaning and Maintenance).

•

Place the appliance on a horizontal, stable and

heat resist surface that is safe against water

splashes.

•

Place all the shelves inside the appliance securely.

•

Optimum working ambient temperature is be-

tween 16°C and 30°C. Otherwise, the functional-

ity will be limited.

•

Ensure that there is sufﬁcient ventilation. Keep

a minimum distance of 10 cm around the appli-

ance. Do not block the ventilation holes.

•

For energy savings, always make sure the door

is closed.

• Ensure that you have all the accessories and

tools needed for assembly and operation. This

also includes suitable personal protective equip-

ment (e. g. gloves, not included).

Note: Due to manufacturing residues, the appli-

ance may emit a slight odor in the ﬁrst few cycles.

This is normal and does not indicate any defect or

hazard. Make sure the appliance is well ventilated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 233795 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 233795 Manual

Product: