Manual Hendi 233757 (page 7 of 68) (English, German, Dutch, French, Italian, Polish)

742112

Zoom out

Zoom in

1/68

Operation

• Connect the power cord to the appliance inlet at

the back of the appliance ﬁrst, then connect pow-

er plug to a suitable electrical power outlet.

• Leaving the appliance for running some hours to

reach the cooling temperature before placing the

beverage or food inside the appliance.

SET

• Digital temperature controller (at the back of the

appliance) operation

1) Setting the temperature

- Press SET to enter into the setting mode. The

set temperature is displayed.

- Press or to increase or decrease the set

temperature.

- Press SET again to conﬁrm the setting and exit.

Then, inside cabinet temperature is displayed.

Note:

- If no button is pressed within 10 seconds. The

newly set temperature will be stored.

- The temperature setting range from 2°C to 7°C.

And the cabinet temperature range can be kept

from 0°C to 12°C.

- Keep the door open time as short as possible in

order to keep a cool temperature inside.

2) Illumination inside the cabinet

- Press to switch ON the light. Press again

to switch OFF the light.

3) Refrigerant LED indicator

- During the cooling operation (compressor en-

abled), this refrigerant LED indicator will lights

up constantly.

- After the inside cabinet reach the set tempera-

ture, the refrigerant LED indicator will ﬂashes

continuously.

- When defrost start, the refrigerant LED indi-

cator light off.

4) Defrost LED indicator

- During the defrost operation, this defrost LED

indicator will lights up constantly.

- After the defrost operation, defrost LED indica-

tor will lights off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 233757 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 233757 Manual

Product: