741695

Hendi 233733 Manual

7
Zoom out
Zoom in
Previous page
1/60
Next page
7
EN
Cleaning and Maintenance
Attention: Always unplug the appliance and open
the glass sliding door to allow it cool down com-
pletely before cleaning.
• Clean the appliance regularly and any food resi-
dues removed.
• CAUTION! Never use any abrasive or hard objects
for leaning.
• The exterior and interior surfaces can be cleaned
with a damp cloth and a little detergent.
• Shelves can be removed and washed in water.
• Do not use water jet or steam cleaner for clean-
ing and do not push under the water.
• No any parts can be cleaned in the dishwasher.
Parts How to clean Remark
All accessories such as water bowl,
shelves, shelf holders, etc.
• Soak in warm, soapy water for
about 10 to 20 minutes.
• Rinse under running water thor-
oughly.
Dry all parts well at last.
External glass surfaces • Wipe clean with a soft cloth and
a little mild detergent. Make sure
no water or moisture enters inside
the of the appliance.
Interior glass surfaces • Remove any food deposits.
• Wipe clean with a soft cloth and
a little mild detergent. Make sure
no water or moisture enters inside
the of the appliance.
Glass door
Storage
• Always make sure the appliance has already
been disconnected from the electrical power out-
let and cool down completely.
• Store the appliance in a cool, clean place.
Troubleshooting
If the appliance does function properly, please
check the below table for the solution. If you are
still unable to solve the problem, please contact the
supplier/service provider.
Problems Possible cause Possible solution
When connected to the electrical
power supply, the temperature set &
the Heating indicator lights on. But
the appliance does not heat up.
• Thermal cut-out activated Contact with the supplier/service
provider for repair.
• Heating element is burnt out.
When connected to the electrical
power supply, switch on and temper-
ature set. The appliance heat up but
the lamp indicator does not light up.
• The indicator light is defective. Contact with the supplier/service
provider for repair.
Neither the lamp indicator nor the
heating elements heat up
• The power plug is not connected
firmly and correctly with the elec-
trical power outlet
Check the connection and make
sure all the connections are correct-
ly connected.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 233733 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 233733 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info