742090
7
Zoom out
Zoom in
Previous page
1/92
Next page
7
EN
Preparation before using for the first time
Remove all protective packaging and wrapping.
Check for the completeness of the product. In
case of incomplete delivery and damages. Please
contact supplier (See == > Warranty).
Clean all components as described (See == >
Cleaning and Maintenance).
Place all the racks inside the appliance.
Note: Due to manufacturing residues, the appli-
ance may emit a slight odor in the first few cycles.
This is normal and does not indicate any defect or
hazard. Make sure the appliance is well ventilated.
Operation
Connect the power plug with a suitable electrical
outlet. Leaving the appliance for running some
hours to reach the cooling temperature before
placing the beverage or food inside the appliance.
°C
Defrost LED
Refrigerant LED
Digital temperature controller operation
1). Setting the temperature
Press to enter into the setting mode. The set
temperature is displayed.
Press or to increase or decrease the set
temperature.
Press again to confirm the setting and exit.
Then, inside cabinet temperature is displayed.
2). Illumination inside the cabinet
Note:
If no button is pressed within 10 seconds. The
newly set temperature will be stored.
The temperature setting range from 2°C to 6°C
(233610, 233627, 233634, 233641, 233658, 233665,
233696, 233238) ; The temperature setting range
from 2°C to 8°C (233269, 233290). And the cabinet
temperature range can be kept from 0°C to 12°C.
Keep the door open time as short as possible in
order to keep a cool temperature inside.
Press to switch ON the light. Press again to switch OFF the light.
3). Refrigerant LED indicator
During the cooling operation (compressor ena-
bled), this refrigerant LED indicator will lights up
constantly.
After the inside cabinet reach the set temper-
ature, the refrigerant LED indicator will flashes
continuously.
When defrost start, the refrigerant LED indicator
light off.
4). Defrost LED indicator
During the defrost operation, this defrost LED
indicator will lights up constantly.
After the defrost operation, defrost LED indica-
tor will lights off.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 233696 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 233696 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info