742414
11
Zoom out
Zoom in
Previous page
1/120
Next page
11
EN
Cooling Fan
Illuminated – fan activated
Blinks - Time delay of fan activation
7.6. OPERATION OF CONTROL PANEL
7.6.1. CHANGING THE SET VALUE
In order to display the set value, press and imme-
diately release the SET button.
Press and hold the button for at least 2
seconds to change the set value. The current set
value will be displayed, and the “°C” or “°F” LED
will start to flash.
To change the set value, press the or
arrows.
To store the new set value, press the SET button
again or wait 10 seconds.
7.6.2. CHANGING PF THE UNIT OF MEASURE
To change a parameter value, enter the pro-
gramming mode by pressing and holding the
button for 3 seconds (the “°C” or
“°F” LED will start to flash) and select desired
parameter
Press the SET button to display its value. Change
the value using the or
Press SET, to store the new value and go to next
parameter. To exit: Press the button
or wait 15 seconds without pressing any buttons.
CAUTION: the set value is stored even when exiting
the procedure by not pressing any buttons.
7.6.3. LOCK & UNLOCK KEYBORD
Press and hold the buttons for more
than 3 seconds. “OFF” will be displayed and the
keyboard will be locked.
Press and hold the buttons for more
than 3 seconds, till the “on” message is displayed.
7.6.4. OPERATION OF CONTROL PANEL
To start the manual defrosting, press and hold the DEF button for more than 2 seconds.
7.7. ALARMS
Alarm Error
P1 Chamber sensor error
P2 Evaporator sensor error
HA Maximum temperature alert
LA Minimum temperature alert
EA External alert
CA Severe external alert
dA Door opened
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 233399 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 233399 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info