742288
6
Zoom out
Zoom in
Previous page
1/80
Next page
6
EN
Installation instructions
Remove the appliance from the carton box, then
remove the external and internal packaging and
wrapping.
Check to make sure the appliance is undamaged.
In case of incomplete delivery and damages, DO
NOT use the appliance. Please contact supplier
(See == > Warranty).
Let the appliance stand upright for about 2 hours.
This is to reduce the malfunction of the cooling
system from improper handling during transpor-
tation.
Clean interior surface with warm water and soft
cloth. (See == > Cleaning and Maintenance).
Place the appliance on a horizontal, stable and
heat resist surface that is safe against water
splashes.
Optimum working ambient temperature is be-
tween 16°C and 32°C. Otherwise, the functional-
ity will be limited.
Ensure that there is sufficient ventilation. Keep a
minimum distance of 10cm around the appliance.
Do not block the ventilation holes.
For energy savings, always make sure the door
is closed.
Operation
The appliance is divided into 2 separate zones. The “UPPER ZONE“ and “LOWER ZONE“ of the appliance are
cotrolled independently with the use of the control panel (2).
Upper zone
U1 L1U2 L2U3 L3T1 S1
Lower zone
Temperature control and display
Plug into a suitable electrical outlet, “888” will be
blinked for few seconds and beep sound will be
heard for the default factory setting.
Then, temperature of the upper zone and lower
zone will be shown on the display (U2/L2).
Next, set the temperature in either zone by press-
ing the “+” or “-“ key of button (U1/L1) [Range:
39°F (4°C) to 68°F(20°C)]. The zone temperature
has a tolerance of + / - 5°F (+/- 3°C) from setting
depending on number of stored bottles & ambi-
ent temperature conditions.
Switch ON/OFF
Press and hold S1 button for 3 to 4 seconds to
switch ON / OFF the appliance.
After switch OFF the appliance, both displays (U2
and L2) will become dark.
Interior lighting
Press either U3 or L3 button to turn ON the light
of UPPER ZONE or LOWER ZONE of the appli-
ance correspondingly.
Press again the U3 or L3 button to turn OFF the
light of UPPER ZONE or LOWER ZONE.
The interior light will keep on lighting if it is not
pressed to turn OFF.
Temperature unit conversion
The temperature display can be changed be-
tween Celsius (°C) and Fahrenheit (°F) by press-
ing the button (T1).
Key Lock mode
If no button is touch within 15 seconds, then the
appliance will enter into “Key Lock” mode. Under
the “Key Lock” mode, the button has no response
unless you cancel the “Key Lock” mode.
To cancel the “Key Lock” mode, press & hold
the U1 button (Press both “+” and “-“ keys at the
same time for few seconds). Then, the “Key Lock”
mode will then be cancelled.
Note: The door of the appliance can be locked at
the bottom (8) by the keys (Supplied)
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 233221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 233221 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info