742479

Hendi 232996 Manual

13
Zoom out
Zoom in
Previous page
1/120
Next page
13
EN
ber (remove unnecessary obstructions).
• Avoid frequent and prolonged opening of the
door.
• Wait a while before opening the door again,
if it has just been closed (suction force cre-
ated in the chamber after the door is closed
will hinder its subsequent opening, which is
a standard phenomenon).
10. TROUBLESHOOTING
A defect of the appliance is often caused by problems which can be easily solved without having
to contact a service technician. In such cases, the following activities should be performed.
10.1. IF THE APPLIANCE DOES NOT WORK, CHECK WHETHER:
• The plug is firmly secured in the power outlet
• The power cord is not damaged.
10.2. IF THE REQUESTED TEMPERATURE IS NOT OBTAINED, CHECK WHETHER:
• The controller switch is on,
• The settings on the electronic control panel
are correct (see item 8.3),
• The appliance is undergoing a defrosting cy-
cle or whether the defrosting cycle just end-
ed,
• The condenser is covered with dust,
• The appliance is located close to a source of
heat or the airflow around the condensation
unit is not obstructed,
• The products stored or other objects make it
impossible to close the door properly,
• The appliance is operating in abnormal
working conditions (excessive load, too many
products inside, products are placed in a
manner which obstructs air circulation).
10.3. IF THE APPLIANCE GENERATES EXCESSIVE NOISE, CHECK WHETHER:
• There are no loose screws in the frame,
• The appliance is placed on a stable surface
and is properly levelled.
In case the appliance still makes excessive
noise after performing the above activities,
please contact technical service. Be ready to
provide the following information:
• The trade name of the model as well as the
serial number (this can be found on the rat-
ing plate),
• Error codes appearing on the display of the
control panel.
10.4. HIGHLY IMPROBABLE RISK
• In case of fire, disconnect the appliance from the mains if possible and use a powder extin-
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 232996 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 232996 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 9,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info