Manual Hendi 232965 (page 12 of 120) (English, German, Dutch, French, Italian, Polish)

742476

Zoom out

Zoom in

1/120

8. CLEANING AND MAINTENANCE

CAUTION: Before cleaning and/or maintenance make sure that the appliance is NOT connect-

ed to the power supply. The maintenance of the appliance should be performed by qualified

and certified personnel.

8.1. CLEANING

Trouble-free operation and service life of the

appliance are essentially dependent on the

proper maintenance according to the schedule.

Daily cleaning of the cooling/freezing chamber

is essential to prevent bacterial growth. Before

cleaning, manually defrost the appliance with

the door open and the drain plug removed.

Follow the instructions below:

• Do not use direct water jet and water under

pressure to clean the appliance as it can

damage the electrical wiring.

• Do not use any metal objects to remove ice

accumulated inside the chamber as it may

scratch and/or damage its internal surfaces.

• Always use lukewarm (not hot!) water with a

mild detergent for cleaning and a soft cloth

for drying of the appliance.

• Avoid using corrosive substances that con-

tain chlorine (and its solutions), caustic

soda, hydrochloric acid, acetum, bleach etc.

It is recommended to wear protective

gloves during cleaning of the appli-

ance.

8.2. CLEANING OF THE CONDENSER

Before cleaning of the condenser make sure

that the appliance is NOT connected to the

power supply. To ensure a trouble-free and

long-term operation of the condenser unit it

is necessary to clean the condenser at least

once a month. Use a brush with long bristles

for condenser cleaning. It is recommended to

wear protective gloves during cleaning of the

condenser - it reduces the risk of injury and

cutting with its sharp edges. Dirty condenser

unit reduces motor power which increases

power consumption of the appliance.

Take care not to damage the cooling system.

It is recommended to wear protective

gloves during cleaning of the appli-

ance - risk of injury.

8.3. MAINTENANCE

Remember to check the technical condition of

the appliance regularly (at least once a year) -

the overhaul should be carried out by qualified

and licensed personnel.

Check whether:

• The condensate drainage system operates

properly.

• There is no refrigerant or freezing agent leak-

age and whether the cooling system operates

properly.

• The technical condition of the wiring system

is absolutely safe.

• The gasket is correctly placed and the door

closes properly.

• The condenser is clean.

• The digital control panel operates properly.

9. FOOD STORAGE

n order to ensure the best possible operation

of the cabinet, the following rules should be

observed:

• Place food products in the cabinet when it

reaches the requested set temperature (visi-

ble on the display).

• Do not place warm food and liquids inside

the appliance.

• If possible, the food should be wrapped or

secured in any other way (air circulation

speeds up the drying of food)

• Do not block air circulation inside the cham-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 232965 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 9,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 232965 Manual

Product: