Manual Hendi 232194 (page 6 of 176) (English, German, Dutch, French, Italian, Polish)

742364

Zoom out

Zoom in

1/176

Installation inside your shop

We suggest you to install the blast chiller/freezer

inside an air-conditioned room. We kindly remind

you that without this facility, malfunction may occur

(for example condensation etc).

ATTENTION!

In order to allow a good functioning of the blast

chiller/freezer please draw attentions to the follow-

ing instructions.

• Do not place the blast chiller to a direct exposure

of sunlight and to all the other means of irradia-

tion, such as high intensity incandescent lights,

cooking ovens, heating radiators.

• Do not place the blast chiller close to external

exits into draught, such as doors, windows, air

vent or air conditioning fans.

• Do not obstruct the blast chiller air inlet.

• Do not place any kind of material on the blast

chiller. Keep clear the whole blast chiller perim-

eter in order to allow a proper air circulation.

• Do no place the blast chiller into an high relative

humidity room (condensate water creation is

possible)

• Do not place the blast chiller inside a closed cav-

ity. Without a proper air circulation the refrigera-

tion unit will not work efﬁ ciently.

• Do not place hot trays or pans on the top of the

blast chiller.

Verify that in the installation room there is enough

air turnover, even during closing and rest hours.

In this way the expansion/condensing unit will

work correctly.

Minimum wall distance

In order to allow a good blast chiller functioning and

a correct air circulation, during the positioning you

have to respect some minimum wall distance as

follows:

• Keep a minimum distance, corresponding to the

door opening length, from the front unit grid

view.

• Keep a minimum 10 cm distance of the blast

chiller back from the wall.

Blast chiller with built in condensing unit

The blast chiller is provided with built in condensing

unit, therefore it is necessary not to obstruct the

blast chiller air inlet corresponding to the front grid

for the air extraction in order to allow a proper air

circulation. Keep clear the whole blast chiller pe-

rimeter. We remind you that room temperature ris-

es or insufﬁcient quantity of air to the unit condens-

er, reduce the blast chiller performances with

possible deterioration of the products and more

energy consumption. If the blast chiller with built in

condensing unit was leant on the side during trans-

portation we suggest you to keep the product in up-

right position for at least 8 hours, before switching

it on. In this way, you will allow the oil to ﬂow in all

the components, lubricating them again. After-

wards you can proceed with the starting.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 232194 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 20,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 232194 Manual

Product: