Manual Hendi 232187 (page 5 of 176) (English, German, Dutch, French, Italian, Polish)

742363

Zoom out

Zoom in

1/176

3. Introduction

Positioning of blast chiller

Before unloading/loading and positioning the blast

chiller inside the shop/kitchen, you are kindly re-

quested to read carefully the instruction manual

in the different chapters regarding the unloading/

loading, dimensions, weight, evaporating water ba-

sin, adjustable feet, electric connections and main-

tenance procedures of the blast chiller subjected in

the present manual.

Transport

Do not superimpose blast chiller packing (allowed

only if there is wooden crate packing option). We

recommend you to transport the blast chiller al-

ways in the upright position (as mention on the

packing). If the blast chiller with built in condensing

unit was inclined during transportation we suggest

you to keep the product in the suggested upright po-

sition for at least 8 hours, before switching it on. In

this way, you will allow the oil to ﬂow in all the com-

ponents, lubricating them again. Afterwards you

can proceed with the start.

Unloading/ Dimensions/ Weight

The unloading/loading procedures should be exe-

cuted by pallet-jack or by forklift driven by skilled

and authorized staff. We decline any liability for fail-

ing to comply with safety rules currently in force.

Before starting the unloading, positioning and in-

stallation procedures of the blast chiller freezer

inside the shop/kitchen according to the model of

the blast chiller, please read carefully the informa-

tion showed in the dimensions and weights list.

The manufacturer declines any responsibilities due

to operations performed without adopting the above

safety precautions.

Packing

At the delivery please check that the packing is in-

tact and that during transportation no damage was

occurred. Remove the external carton-box; remove

the fastener that keeps still the blast chiller/freezer

to its pallet, put it in the correct position and then

remove the adhesive white protection of the stain-

less steel. The recovery and the recycling of the

packing materials such us, plastic, iron, carton box,

wood help the saving of row material and reduce the

waste. Please consult your area address book for

disposal of materials and authorized garbage

dump.

Condensate water draining / draining connection

The blast chiller is available with a built in condens-

ing unit complete with a removable condensate wa-

ter basin with manual defrost (without defrost heat-

er). The basin is assembled in the lower part, under

the condensing unit.

Positioning and feet regulation

Place the blast chiller in a perfect horizontal posi-

tion, acting if necessary on the screw type adjusta-

ble feet. Use a spirit level to check it. The blast chill-

er must be placed in order to operate properly and

allow the correct defrost condensate water drain-

ing. In this way you will avoid

noisy vibrations of the condens-

ing unit. Check the correct posi-

tioning of the condensate water

basin and its draining.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 232187 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 20,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 232187 Manual

Product: