742361
11
Zoom out
Zoom in
Previous page
1/176
Next page
11
EN
Measuring the temperature at the product core
When the thickness of the products allows it, al-
ways use the core probe to know exactly the reached
temperature at the product core, and do not inter-
rupt the cycle before the temperature of +3°C and
-18°C is reached. For a correct function of the blast
chiller, it is necessary that the products contained
inside are well placed in the middle, in order to al-
low a good circulation of the air in the blast chiller.
Do not obstruct the blast chiller/freezer air inlets
inside the device
For a correct function of the Blast Chiller, it is nec-
essary that the products contained inside are well
placed in the middle, in order to allow a good circu-
lation of the air in the Blast Chiller.
ATTENTION!
Children must be kept away from the Blast Chiller.
Conservation of the food cooked and blast freezed
The food cooked and blast freezed can be preserved
in the fridge keeping the organoleptic qualities up to
5 days from the date of treatment.
It is important to respect the cold chain, keeping
during the conservation a stead temperature be-
tween 0°C and 4°C, according to the food.
Using the technique of vacuum packing, the time of
conservation can be raised until about 15 days.
Conservation of the food cooked and deep frozen
The food cooked and deep frozen can be preserved
in the fridge keeping the organoleptic qualities up
to several months from the date of treatment. It is
important to respect the cold chain, maintaining
during the conservation a stead temperature from
0° to 4°C, according to the kind of the food. Using
the vacuum technique, the conservation time can be
raised until about 15 days.
The food which is subject to negative cycle can be
safely preserved for a period of time from 3 to 18
months, according to the food treated.
It is important to respect the conservation tem-
perature equal or below -20°C.
ATTENTION!
Avoid leaving at room temperature the food
cooked and to be blast frozen.
• Avoid humidity loss, at risk of the food fragrance.
The blast frozen food must be protected by a pro-
tective fi lm (better if vacuum packed) and provided
with adhesive label on which must be indicated:
• The content
• The day of preparation
• The assigned expired date
ATTENTION!
Once the food is defrosted, it cannot be frozen
again.
Blast chiller starting up procedures
Blasting cycle with core probe
1. Push the green button.
2. Push the button “SET
SET
to select the tempera-
ture +3°C or -18°C.
3. Afterwards, push the button “START/STOP” to
start the cycle.
4. At the end of the cycle (when the buzzer starts to
ring), the machine passes automatically into the
conservation phase.
5. To stop the cycle, press “START/STOP .
HEART
OF THE
PRODUCT
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 232163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 232163 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 20,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info