Manual Hendi 232033 (page 126 of 128) (English, German, Dutch, French, Italian, Polish)

742395

126

Zoom out

Zoom in

1/128

126

Maintenance

Remember to check the technical condition of the

appliance regularly (at least once a year) - the over-

haul should be carried out by qualiﬁed and licensed

personnel.

Check whether:

• The condensate drainage system operates prop-

erly.

• There is no refrigerant or freezing agent leakage

and whether the cooling system operates prop-

erly.

• The technical condition of the wiring system is

absolutely safe.

• The gasket is correctly placed and the door clos-

es properly.

• The condenser is clean.

• The digital control panel operates properly.

Food storage

In order to ensure the best possible operation of

the cabinet, the following rules should be observed:

• Place food products in the cabinet when it reach-

es the requested set temperature (visible on the

display).

• Do not place warm food and liquids inside the

appliance.

• If possible, the food should be wrapped or se-

cured in any other way (air circulation speeds up

the drying of food)

• Do not block air circulation inside the chamber

(remove unnecessary obstructions).

• Avoid frequent and prolonged opening of the door.

• Wait a while before opening the door again, if it

has just been closed (suction force created in the

chamber after the door is closed will hinder its

subsequent opening, which is a standard phe-

nomenon).

Troubleshooting

A defect of the appliance is often caused by problems which can be easily solved without having to contact a

service technician. In such cases, the following activities should be performed.

If the appliance does not work, check whether:

• The plug is ﬁrmly secured in the power outlet.

• The power cord is not damaged.

If the requested temperature is not obtained, check whether:

• The controller switch is on,

• The settings on the electronic control panel are

correct (see Maintenance),

• The appliance is undergoing a defrosting cycle or

whether the defrosting cycle just ended,

• The condenser is covered with dust,

• The appliance is located close to a source of heat

or the airﬂow around the condensation unit is not

obstructed,

• The products stored or other objects make it im-

possible to close the door properly,

• The appliance is operating in abnormal working

conditions (excessive load, too many products in-

side, products are placed in a manner which ob-

structs air circulation).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 232033 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 232033 Manual

Product: