Manual Hendi 230299 (page 12 of 124) (English, German, Dutch, French, Italian, Polish)

742484

Zoom out

Zoom in

1/124

Maintenance / Care / Repair

The perfect operation and safe use may be ensured

only through the correct use of the appliance, as

well as the compliance with the operation instruc-

tions, the corresponding speciﬁcations and the

care and cleaning indications.

This applies both for the compliance of the provi-

sions of law on appliance safety (GSG) and the ex-

isting speciﬁcations of ZH 1 and VBG on accident

prevention.

RECOMMENDATION: Before cleaning or mainte-

nance works, the appliance should not be connect-

ed with voltage through the installed main switch /

fuse. The appliance should never be sprayed with

water or high pressure cleaning aid, because any

insertion of water in the electrical elements may

affect the regular operation of the appliance as

well as the protection against electrical shock (in-

sulating protection).

We recommend that you prepare a relevant main-

tenance agreement for all maintenance and repair

works with our company (or with a service team /

workshop of an authorized local dealer who sold

the appliance).

All works / repairs performed in this appliance

must be reported on the last page of the operating

instructions, along with the signature / company

name.

Substantially, no safety arrangement should be put

out of operation. If the disassembly of individual

safety arrangements is required, e.g. for mainte-

nance or repair works, the reassembly of the rel-

evant safety arrangements should be performed

immediately after the completion of works.

Unloading the water from the dishwasher’s tank (dispenser)

• Turn OFF the power of the dishwasher

• Empty the washing dispenser removing the over-

ﬂow hose A.

• Remove the ﬁlter B and clean it carefully with

water.

• Rinse the washing compartment to remove any

dirt residues.

• Then, reassemble the parts in reverse order. The

appliance should never operate without a ﬁlter.

• During non-operation, the door should remain

half-open or completely open (in order to avoid

odours).

Regular maintenance and cleaning works

Regularly, you should remove the rotating arms

and sprinkler, clean them carefully with water and

reposition the parts in reverse order. This work

should be performed with great care.

Pay attention to the correct position of filters and sprinkler!

• Do not clean the sprinkler’s injectors with tools

or sharp objects.

• You may clean the appliance with warm water and

conventional cleaning aids. Rub with water and

then let it dry. The stainless steel parts should

be treated with special means for steel and you

should never clean them with steel wire, brush,

etc. Also, you should never let them touch the

surface, since even the lightest contact with the

surfaces may cause rust formation. You should

use brushes made of polymer plastic or natural

brushes or thin wire.

• You should take care to move towards the

smoothing direction, so that you will not scratch

the surface. Finally, rinse with clean water and

dry thoroughly.

• We remind you that corrosion (rust formation) on

stainless steel surfaces is not created by itself,

but rather due to the use of improper cleaning aid

(e.g. whitening or particularly caustic cleaning

aid based on chlorine). Following a particular pe-

riod of use, calcium sediments are formed in the

internal walls of the dispenser (due to mineral

particles in the water), which may affect the cor-

rect operation of the appliance. For this reason,

regular removing of salt formations is required.

• We recommend letting this work (removing of

salt formations) to be performed by specialized

personnel (or by an authorized local dealer who

sold the appliance).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 230299 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 230299 Manual

Product: