740683
7
Zoom out
Zoom in
Previous page
1/76
Next page
7
EN
Temperature setting:
Press TIME/TEMP button once in standby mode
to check the temperature setting, when the tem-
perature is blinking in the display, you can also
press button + or - to increase or decrease oper-
ation temper ature setting. (Default temperature:
70°C, range: 35°C ~ 70°C, interval is 5°C).
The user should press START/STOP button to
confirm the temperature setting.
If you want to check the temperature that was
set, press TEMP / TIME button once and the set
temperature will be shown on the LED display.
During the operation process, you can check
or change the time and temperature setting by
pressing the TEMP / TIME button. And then press
button + or - to increase or decrease the temper-
ature and time setting.
Time setting:
Press TIME/TEMP button twice in standby mode,
then the timer is blinking in the display, the user
can press button + or - to increase or decrease
operation time. (Range: 00:30 ~ 24:00, interval is
30 minutes).
The user should press START/STOP button to
confirm the timer setting.
Then, the appliance will start operation and re-
maining time will be shown on the LED display.
The fan at the rear side of the appliance will start
rotation.
KEEP WARM mode:
The display will show “KEEP WARM” if pressing
“KEEP WARM” button. The machine will keep
working for extra 24 hours in 35°C temperature
after finishes dehydrating.
When the countdown timer finishes, the display
will show 88:88 and the heating element will
switch off. The fan will continue running for 10
seconds and the machine will beep 20 times to
remind the user. After beeping 20 times, the ma-
chine will go back to standby mode.
FAST/RAW mode:
In FAST mode, the temperature is 70°C and the
timer is 10 hours. The display will show “FAST”.
In RAW mode, the temperature is 45°C and the
timer is 24 hours. The display will show “RAW”.
Switch to STANDBY mode
If the user did not press START/STOP button in
5 seconds after setting, the machine will jump
back to standby mode. Only TEMP/TIME button
will be blinked in blue and the LED screen is fully
displayed.
Time setting end up
When the setting time counts down to 00:00, the
heating elements stop working first. The cool-
ing fan will still continue running for about 10
seconds and 20 times of “beep” sound from the
buzzer will be heard to remind the user the oper-
ation is finished.
‘End’ will be shown on the LED display and the
appliance is in STANDBY mode.
Unplug the appliance and wear gloves (not in-
cluded) if necessary to take out the food.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 229064 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 229064 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info