741256

Hendi 229026 Manual

7
Zoom out
Zoom in
Previous page
1/72
Next page
7
EN
• Press the ON / OFF button to start the opera-
tion, the LED display will show the default time
“10:00” (10 hours). All buttons on the control pan-
el will be lighted up in blue.
Time setting:
• Now, you can press button + or - to increase or
decrease operation time. (Range: 00:30 ~ 24:00,
interval is 30 minutes).
• The setting time will be stored automatically
within few seconds.
• Then, the appliance will start operation and re-
maining time will be shown on the LED display.
The fan at the rear side of the appliance will start
rotation.
Temperature setting:
• Press TEMP / TIME button once to check the
temperature setting, you can also press button
+ or - to increase or decrease operation temper-
ature setting. (Default temperature: 70°C, range:
35°C ~ 75°C, interval is 5°C).
• The setting temperature will be stored automat-
ically within few seconds and return to display
remaining time on the LED display.
• If you want to check the temperature that was
set, press TEMP / TIME button once and the set
temperature will be shown on the LED display.
• During the operation process, you can check
or change the time and temperature setting by
pressing the TEMP / TIME button. And then press
button + or - to increase or decrease the temper-
ature and time setting.
Switch to STANDBY mode
• Press ON / OFF button to turn to STANDBY mode. All the buttons will go out except the ON / OFF button.
And the LED display will be shown as “ 0000 “ in white.
Time setting end up
• When the setting time counts down to 00:00, the
heating elements stop working first. The cool-
ing fan will still continue running for about 10
seconds and 20 times of “beep” sound from the
buzzer will be heard to remind the user the oper-
ation is finished.
• ‘End’ will be shown on the LED display and the
appliance is in STANDBY mode.
• Unplug the appliance and wear gloves (not in-
cluded) if necessary to take out the food.
Cleaning and Maintenance
Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely
before cleaning.
Cleaning
• Clean the inside and outside of the appliance,
trays, bottom pad and door with luke-warm wa-
ter, a mild detergent and a soft cloth. Do not clean
the fan part.
• Dry all parts with a dry cloth before storing the
appliance.
• Occasionally clean the fan unit with a vacuum
cleaner.
• Note! To avoid damaging the appliance, do not
clean the appliance with aggressive chemical or
abrasives
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
• Store the appliance in a cool, clean and dry place
and out of reach of the children.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 229026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 229026 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info