741090
12
Zoom out
Zoom in
Previous page
1/17
Next page
Disassemble the components, separating the various types and send them to
the scrapyard or dispose of them according to the local and national laws in
force.
04 INSTALLATION
04.01 Packaging Contents
On delivery, the Manual for the Use and Maintenance containing the Declaration of
Conformity of the product in agreement with the competent EC regulations is included
in the packaging and is considered an integral part of the supply.
The Machine arrives in a single cardboard package ready for use.
To lift the Machine it is necessary to use a forklift or a transpallet: insert the forks un-
der the pallet. To lift the Machine by ropes or belts, cross them under the pallet.
Take care to handle the box only manually, always keeping it in an upright position as
indicated on the box
On receiving, check the packaging and the machine to verify transport’s damages.
Indicate all defects on the note.
04.02 Positioning
Before positioning the Machine, ensure that the bearing surface is a horizontal level.
04.03 Installation
The Machine doesn’t require any further installation operation other than its connec-
tions, and is ready for use.
The machine must be connected to the electric system.
04.04 Connections
Once positioned, connect the machine to the electric power supply, after having:
ensured that the tension and frequency of the power supply correspond to
that written on the plate;
ensured that that socket is connected to earth;
taken steps to have the proper plug (16 ÷ 32A) to a 3 pole wire (phase, neu-
tral and earth), for mono-phase versions, or a 5 pole wire (3 phases, neutral
and earth), for tri-phases versions, attached by specialised, capable.
The Manufacturer specifies that the main line should be equipped with safety devices
by a differential switch, co-ordinated with the general earth installation, in conformity
with the local and national laws.
Check that the safety devices of the Machine are present and assembled before acti-
vating the machine.
Check also that the Whisk (or Spiral) and Bowl (or Pot) rotate clockwise: if this is not
the case, invert the arrangement of the phases.
Using the Machine for the first time, clean it as described in the instructions.
CONNECT THE MACHINE ONLY TO PARTS OF THE ELECTRICAL PLANT WHICH ARE
INDIVIDUALLY PROTECTED
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 226346 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 226346 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hendi 226346

Hendi 226346 User Manual - German - 15 pages

Hendi 226346 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info