Manual Hendi 225929 (page 7 of 32) (English, German, Dutch, French, Italian, Polish)

741833

Zoom out

Zoom in

1/32

5. MAINTENANCE AND CLEANING

Warning: before performing any task disconnect the appliance from the electric power supply.

GENERAL CLEANING

Carry out cleaning when the oven is cold. Do not use

products containing chlorine to clean steel (sodium

hypochlorite, hydrochloric acid, etc) even if they are

diluted. Use speciﬁ c commercial products and a lit-

tle hot vinegar.

Rinse well with water, without using direct jets, and

dry with a soft cloth.

Clean the glass door of the oven with hot water and

do not use coarse cloths.

CLEANING THE OVEN

The inside of the oven should be cleaned at the end

of each day’s work. In this way it will be easier to

remove cooking residue so as to prevent it burning

the next time the oven is used.

When the oven is cold, clean it thoroughly with the

appropriate commercially available products.

REPLACING THE OVEN LAMP

Disconnect the appliance electrically; remove the later-

support for cooking vessels by lifting the support

upwards. Wait for the cover and the lamp to cool

and then unscrew the protecting glass cover without

using tools so as to avoid breakages. Unscrew the

lamp and replace it with another one having these

features:

Voltage: 230/240 V, power: 15 W, attachment: E14

Reﬁ t the glass cover and the lateral cooking vessel

support and connect the power supply.

MAINTENANCE

Our appliance does not require scheduled mainte-

nance but an annual maintenance contract should

nevertheless be drawn up in order to keep the appli-

ance safe and in perfect working order.

For information purposes, maintenance must apply to:

• gas part – pressure adjustment, checking seal,

correct operation, status of switch-on electrode,

fume discharge, etc.

• electrical part – checking power cable, lamps and

pilot lights, checking electrical resistances, fan

and safety systems, etc.

• hydraulic part – checking seal of water system,

jet of humidiﬁ er, water pressure, etc

• internal cleaning – removal of residue from cook-

ing chamber, including fan blades (after removal

of fan cover), removal of residues from discharge

routes, etc.

ELECTRICAL DATA TABLE

Terminal block ﬁ tting for 3 x 1.5 mm cable, voltage 230 VAC 50 HZ class 1

Fitting for circuit breaker connection for cables up to 3 mm2

WATER DATA TABLE

Water inlet ﬁ tting = ¾ inch thread with seal washer

Drainage ﬁ tting = stainless steel pipe, 25 mm diameter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 225929 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 225929 Manual

Product: