741201

Hendi 225882 Manual

12
Zoom out
Zoom in
Previous page
1/40
Next page
MAINTENANCE & CLEANING
REPLACING PARTS
Only qualified personnel should replace faulty parts. Prior to commencing any kind of work, disconnect the unit from the gas
distribution network and the electrical power supply.
CLEANING AND CARE OF THE APPLIANCE
The unit must be cold to clean it.
Keeping the appliance clean is very important for a long and trouble-free working life. The removable parts should be washed
separately with warm water and detergent, then rinsed in running water. The steel parts may be cleaned with a damp cloth and
with a non-abrasive detergent and then dried by using a soft, dry cloth. For very resistant stains, use hot water and vinegar. Do
not use harsh or abrasive detergents to clean the stainless steel parts. Iron cleaning pads should not be used as they cause the
formation of rust. For the same reason, avoid contact with ferrous materials. When cleaning, avoid using abrasive paper or
cloth; instead and only in special cases you can use pumice stone powder; we recommend using sponges (ex. Scotch) to
remove stubborn deposits. You can also use common sprays for cleaning ovens and grills to remove stubborn deposits. If spray
products are used, follow the manufacturer’s instructions. The enamelled parts should not be cleaned with abrasive or acid
products. Avoid using steel wool or metal pads for cleaning. It is important to clean the oven each time you use it; this way it will
be easier to remove cooking residues and avoid burning them the next time the oven is used, which would also result in a bad
smell. To minimise the emission of polluting substances in the environment we suggest cleaning the appliance with products
that are at least 90% biodegradable.
CLEANING INSIDE THE OVEN
Turn the electric power off or make sure you have turned the burner of the oven of before doing any work on it. Let the oven
cool down and clean it thoroughly with a damp cloth and warm water using a non-abrasive detergent (or with the special
products readily available for cleaning ovens). Do not use abrasive cloths or pads or other products that could irreparably
damage the enamel. Normal cooking temperatures help transform grease and oil splashes into a mist of residual dust that can
be easily removed at the end of the cooking process when the oven has cooled down by simply using a damp sponge. We
recommend heating the oven periodically to the maximum temperature so that the residual dust can be removed once it has
cooled down. Be careful not to damage the thermostat sensor inside the oven while you are cleaning it.
MAINTENANCE
The appliance needs no specific maintenance besides normal cleaning; we do however suggest having it checked
once a year by the assistance centre for which, we recommend drawing up a maintenance contract.
Safety precautions
REMEMBER THAT THE APPLIANCE:
Must never be left unattended when it is being used!
When the unit is switched on, its surfaces get very hot so please take great care!
The appliance is intended for professional use and therefore only qualified personnel should use it!
Installation as well as any conversion or adaptation to a different type of gas must be carried out in accordance with
current laws and only by qualified and authorized personnel.
In the case of fire, close the shut-off cock to cut off the gas supply immediately, then use a suitable fire extinguisher to
fight the fire
ECOLOGY AND ENVIRONMENT
Our appliances are studied and optimised, with lab tests, to provide high performance and yields. However, to keep energy
consumption low (electricity, gas and water), we suggest not using the appliance for any length of time if it is empty or in
conditions that compromise optimum yield. All packaging materials are environment-friendly. They can be kept without problem
or burnt in a waste incinerator plant. The plastic components that can be recycled are:
Polyethylene: external packaging material and/or pluribol film
Polypropylene: straps
Polystyrene foam: corner pieces, sheets and protection blocks.
At the end of the appliance’s useful life, dispose of it properly. 90% of each appliance is made of metal (stainless steel, iron,
aluminated sheet, etc.) hence it can be recycled by the relative recycling organisations in compliance with the standards in force
in your country.
Prepare the appliance for disposal, so it cannot be used any more, by removing the power cable and any locks so that
no one can get locked inside accidentally.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 225882 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 225882 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info