741164

Hendi 224335 Manual

15
Zoom out
Zoom in
Previous page
1/132
Next page
EN
15
EXTRAORDINARY MAINTENANCE
For the intervention of extraordinary maintenance,
consequent to breaks or revisions or mechanical
and electric damages, it is necessary an interven-
tion request directly to the Authorized Assistance
Center.
The instructions about the extraordinary mainte-
nance don’t appear in the present instruction man-
ual for the use and so must be explicitly requested
to the manufacturer.
CLEANING
It is forbidden to clean by hand the organs and the
elements in motion.
All cleaning interventions must be started only and
exclusively, after having unloaded the machine with
the food product in working and having insulated
from the electric feeding source and from external
energy.
The machine, the electric equipment and the ma-
chine board components must not be ever washed
utilizing water, and not in any kind of jets form and
quantity; so, without “bucket” nor “rubber” nor
“towel”.
Don’t put ever directly the machine in the sink or un-
der the tap.
The machine hygiene level classification and the
associated equipment, for the foreseen use, are 2
(two): machine that, after a hygiene risk evaluation,
is in conformance with applicable international
standards requirements, but requests a pro-
grammed disassembly for the cleaning.
FREQUENCY PERSONNEL MODALITY
At the end of every
shift work and however
before the daily use
Operator All the surface and the machine parts destined to come in contact
with the food product or with the food zones (tools external and in-
ternal surface) and the jets zones (tool superior surface connected
with the machine and machine external surface), must be cleaned
and disinfected with the under reported modalities. For the grinding
group disassembly activities see the previous descriptions.
• Scrape the surfaces from the possible food product residuals
(for example with plastic scrapers);
• Clean all the food zone surfaces and jets zone with a morbid
dampened clothes (not draining) with detergent diluted in hot
water (also common soap for dishes is good).
Don’t soak them. With a towel clean inside the grinding mouth.
Use specific products for steel, which must be liquids (not in
cream or pastries however abrasive) and above all must not con-
tain chlorine. Against the fat substances the denatured alcohol.
• Rinse with cleaned hot water and successively dry all food zone
surfaces and jets zone with soft clothes that don’t lose coats.
• The mixer tool, being in stainless steel, cannot be washed in
dishwasher, much less the plastic parts.
• The reassembly must happen only following working require-
ments, leave the pieces wrapped up in soft dry clothes that don’t
lose coats.
PERIODS OF LONG INACTIVITY
• During the machine long inactivity periods provide to pass vigo-
rously on all steel surfaces (especially if stainless) a clothes
soaked of Vaseline oil so that to spread a protective veil.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 224335 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 224335 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info