741900

Hendi 223369 Manual

20
Zoom out
Zoom in
Previous page
1/48
Next page
20
EN
• ON/OFF
When power is supplied to the oven the control panel lights up and the operating display indicates tempera-
ture in cooking chamber.The oven now is ready for operating.
• START/STOP COOKING PROGRAM
This button starts/stops a previously set program or cooking cycle.
• TEMPERATURE SELECTOR
When the oven is on “ON” the temperature display shows the temperature in the cooking chamber.To set the
desired cooking temperature press the temperature selector and press (+) or (-) buttons for INCREASE or
DECREASE. The temperature display will show the set value. Press the temperature button for confirmation
or wait 5 seconds and it will automatically be confirmed. Values go from 30°C to 260°C.
During cooking the CHAMBER display shows actual internal chamber temperature and to see the set tem-
perature you must press “temperature button”. Heating element led is on red when the heat is on and green
when it is off.
• TIMER
Press Timer button, to set the time value by acting on (+) or (-) for INCREASE or DECREASE. The time which
appears on the display must be confirmed pressing the timer button or wait 5 seconds for automatic confir-
mation.
The programmable times range is 999 minutes.
Acting on the timer button if you go under value of “1” on display you will see “----“: means “infinite time” the
oven will continue to work with the set parameters until START/STOP button is pressed. The time display will
start count-up so you can see from how long the oven is operating.
In case you set minutes on the time display will start countdown during cooking.
• STEAM
Enables humidifying in manual cooking or to program the various humidity settings during process.
- Humidifying in manual cooking: during cooking, the STEAM button enables the release of steam into the
cooking chamber for as long as it is pressed. The STEAM led will be on. If the motor turns the other way (only
for models with inverter system), humidifying will stop briefly.
- To program automatic humidifying during cooking: after pressing the STEAM button, it is possible to in-
crease or decrease the humidity by pressing + / -. It ranges from: OFF – 20% - 40% - 60% - 80% - 100%.
During programming the values flash on the display and pressing STEAM again will memorize them or wait 5
seconds for automatic confirmation.
- During cooking, the STEAM led goes on when steam is being released into the cooking chamber and it stop
briefly when the motor turns the other way (only models with inverter system).
- During cooking, keeping the STEAM button pressed enables manual humidifying at any time for as long as
it is pressed.
The set of humidification is allowed only before running a cycle. To change the set of humidification: press
STEAM button and on the Display 1 show „hum”, the Display 2 (DISP2) show flashing the set-humidifies, with
+ / - button you change its value.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 223369 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 223369 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info