741900

Hendi 223369 Manual

13
Zoom out
Zoom in
Previous page
1/48
Next page
13
EN
2. TESTING
The oven should be tested by carrying out a trial cooking session to check that the appliance is working prop-
erly and that there are no problems or malfunctioning. Set the temperature controller at 150° C and the timer
to 10 minutes.
Check every item in the list below:
• The coking chamber light is ON.
• The oven stops (heating, humidification, motors/fans) when the door is opened and resumes operating when
the door is closed again. (This only for models with inverter gear)
• On reaching the set temperature, the cooking temperature thermostat turns off the heating elements.
• The fans automatically invert the direction of rotation; the inversion occurs every 2 minutes. Humidification
turns off briefly for 20 seconds when the machine is stopped (This only for models with inverter gear)
• The cooking chamber fans spin in the same direction.
• If the oven is equipped with a humidity controller, after using button to activate it, check that water is being
discharged to the fan from the humidity inlet duct in the oven chamber
CLEANING
FIRST CLEANING OF THE COOKING CHAMBER OF THE OVEN
Disconnect electrical power from the appliance and wait until the oven is cooled completely before clean-
ing.
There should never be any residue of solvents or detergents. They should be removed by rinsing thoroughly
using a damp cloth. Appropriate eye, mouth and hand protection should be used. Possible danger of corrosion.
Heat the oven empty up to 200° C (392° F) for about 30 minutes so as to eliminate thermal insulation odors.
Clean the walls of the cooking chamber using hot water and soap, then rinse; never use aggressive or acid
products
3. ORDINARY MAINTENANCE
The user is solely responsible for ordinary maintenance. The Assistence Centre must be contacted for extraor-
dinary maintenance which requires a specialized authorized technician.
Before cleaning, disconnect the device from the power supply and wait until it is fully cold.
ATTENTION: never clean the device with water jet of pressurised vapour.
ORDINARY CLEANING OF COOKING CHAMBER
At the end of a working day, clean the equipment, both for hygienic reasons and to avoid malfunctioning.
The oven must never be cleaned using direct or high pressure water jets. In the same manner, to clean the
applian¬ce do not use pan-scrubbers, steel brushes or scrapers; it is possible to use stainless steel wool,
rubbing it in the direction of the sheets satin finish
For manual cleaning follow the procedure below:
• Turn on the appliance and set the temperature to 80°C.
• Leave it on for 10 minutes on steam
• Turn off the appliance and let it cool down
• Remove the side tray racks. Manually remove all removable residues place the removable parts inside
dishwashers.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 223369 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 223369 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info